Forum Replies Created
-
-
20. Januar 2017 at 15:20 #26161
Hi Mike,
Wenn die Ausgabe des DAC’s bereits in der geringsten Lautstärke Verzerrung aufweist, teste ihn bitte an einem anderen Ausgabegerät um einen Fehler dessen auszuschließen.20. Januar 2017 at 15:18 #26160Hi bjarne,
Please try this command:
volume_range_db=dBvalue;
Set this dBvalue to use just a portion of the full range of
attenuation offered by a mixer. For example, if a mixer has a
minimum volume of -80 dB and a maximum of +20 dB, you might wish
to use only 60 dB of the 100 dB available. This might be because
the sound becomes inaudible at the lowest setting and unbearably
loud at the highest setting — indeed, many domestic HiFi
systmes have a volume copntrol range of just 60 to 80dB. Another
potential use might be where the range specified by the mixer
does not match the capabilities of the device. For example, the
Raspberry Pi’s DAC that feeds the built-in audio jack claims a
range of 106 dB but has a useful range of only about 35dB. The
setting allows you to specify the maximum range from highest to
lowest. The range suggested for the Raspberry Pi’s built-in
audio DAC, which feeds the headphone jack, is 35. Using it in
this case gives the volume control a much more useful range of
settings. If you omit this setting, the full „native“ range of
the mixer is used.20. Januar 2017 at 15:07 #26156Das ist zur Erstellung eines echten Buttons. Das Voice Control plugin findest du in unserer Erweiterungsübersicht „Plugin Sprachsteuerung“: https://www.max2play.com/addons/
Die Befehle dich ich meine sind http-Adressen, diese kannst du zB als Verknüpfung auf dem Smartphone einrichten.
In Jivelite lässt sich dies jedoch nicht ohne weiteres integrieren.Allerdings haben wir vor kurzem einige Bug Fixes im Bluetooth plugin vorgenommen. Es kann also sein, dass dein Reconnect-Problem dadurch bereits beseitigt wurde. Bitte update dein System auf Version 2.40
20. Januar 2017 at 15:01 #26155Jivelite is ideal, however, you do need a Squeezebox Server to host your music and the preinstalled player (the „max2play“ in your menu). You can install the server via the web interface (enter „max2play/“ in a browser on any other device in your network) under the menu „Squeezebox Server“. Select the version 7.9 nightly and let it install. You can then enter it via app, Jivelite, web interface or even AirPlay if you install the addon „shairtunes2“.
20. Januar 2017 at 14:53 #26154Hi heinzel,
We made some bug fixes in the new version to the Bluetooth plugin. Please try updating to version 2.4018. Januar 2017 at 17:59 #26067Hallo Mike,
Von HiFiBerry’s Produktseite:
The DAC+ Light is based on an ESS Sabre chip set that does not have ALSA volume control. To control the volume, you need to use an application with software volume control or a (pre-)amplifier with volume control.
Wir empfehlen die Nutzung der Lautstärkeregler am Endgerät (Boxen, Stereoanlage, etc.)18. Januar 2017 at 17:18 #26052Hi drundanibel,
There is a feature to hide the cursor in the RPi Display menu. If you did not get a cursor at all, please try activating it and again removing it.18. Januar 2017 at 15:22 #26029Hi Segun,
Please check whether your filesystem is expanded and has enough space left (debug info window in the Settings/Reboot tab). Also, if you are able to connect via LAN, please try this out in order to rule out an instable WiFi connection as a source of error.18. Januar 2017 at 15:17 #26028Please try out a different Pi if this is possible to rule out yours as the source of error.
18. Januar 2017 at 15:12 #26027Okay,Gotcha. Here are a few solutions detailed you could try to solve your issue: http://raspberrypi.stackexchange.com/questions/33037/how-to-add-delay-at-boot
18. Januar 2017 at 15:05 #26026Sure, we would love to assist to you in creating a custom Plugin for your solution! We would also appreciate you sharing the results once you have something working. Stefan did a video on how exactly you can create plugins using the Builder. If you encounter any major issues outside these guidelines, please share them in this topic and I will try to answer them as quickly as possible.
16. Januar 2017 at 17:36 #25975Hallo Fuselx,
Also findet dein SBS aktuell den Player überhaupt nicht, obwohl lediglich ein Server im lokalen Netz verfügbar ist? In diesem Fall würde ich entweder ein frisch gebranntes Image empfehlen oder einen Check deines lokalen Netzes bezüglich irgendwelcher Interferenzen.16. Januar 2017 at 17:28 #25974Hi mattzee,
So sorry about the late response. Unfortunately, we do not currently have a fix to support these extremely high sample rates. However, if you find a fix that could be implemented, let us know and we will look into it.16. Januar 2017 at 17:17 #25971Jep, und denen das Joggler Skin von der Auflösung passt. Dieses ist für den 7″ Touchscreen von Raspberry Pi designiert, funktioniert jedoch natürlich auf allen Ausgabegeräten.
16. Januar 2017 at 17:07 #25969Hi ayodeji,
Please activate the USB max current feature in the Raspberry Settings. Also, which version of the SBS do you have installed? We always recommend using the 7.9 nightly.16. Januar 2017 at 17:05 #25968Hi ernst-jan,
Where do you try to change the volume? First of all, you can change to hardware volume control: https://www.max2play.com/wiki/optimizing-squeezelites-volume-control/
Otherwise, you should be able change the volume on the Squeezebox Server interface, or in the corresponding apps, or in Jivelite, etc.16. Januar 2017 at 16:59 #25965Hallo Jens und Didi,
Entschuldigt bitte die späte Rückmeldung. Wir haben das Triode Plugin vor wenigen Wochen erneut erfolgreich getestet gehabt. Dabei haben wir auch diese Lösung mit dem Protocol Handler erfolgreich testen können. Aktuell haben wir jedoch nur ein detailliertes How-To zur ersten Lösung. Wir werden bald beide erneut testen und falls das Triode Plugin in der Tat nicht mehr funktionsfähig ist werden wir die offizielle Lösung anpassen.
Danke für euer Feedback.16. Januar 2017 at 16:50 #25964Hi airheader911,
The help section of the Filesystem/Mount menu is very helpful on that:
Mountpoint on Max2Play (for usage in Squeezebox Server or XBMC): /mnt/mountdir/ Mountpoint must be a subdirectory in /mnt/ OR /media/ and will be generated, if it is not existing.16. Januar 2017 at 16:42 #25963Hi JosepZ,
Sorry about the late response. The version of Kodi can be manually upgraded in the Kodi menu of the Max2Play web interface. Just copy and paste the repository you want to install from. With the update button, you can currently update via Max2Play to version 16.116. Januar 2017 at 16:25 #25956Hi um9kc,
The Speech Control Plugin is still in beta and it was developed for the Raspberry Pi. However, if you have any success or found out something new with the Odroid U3, please share your experiences.16. Januar 2017 at 16:22 #25955Hi xaver,
Der std hat dir am selben Tag geantwortet.
Ich habe nach der Weihnachts- und Neujahrszeit auch noch eine Antwort verfasst.
Nun gibt es eine dritte Antwort, auch wenn du diese nicht mehr liest.
Prüfe bitte deine Dateien und Ordner auf Rechte und Format.
Dies war öfters ein Problem beim scannen des Squeezebox Servers.
Auch dir alles Gute16. Januar 2017 at 16:12 #25954Hi repuik,
Please try deactivating the autostart of Jivelite in its web interface menu.16. Januar 2017 at 16:11 #25953Hi apakett,
Please take a look at this topic: https://www.max2play.com/forums/topic/no-sound-or-interrupted-sound-when-streaming-form-own-apple-lossless-collection/
The parameter -e alac should help you out.16. Januar 2017 at 15:29 #25952It would make sense to create individual shares for both. Otherwise, both are in the same directory.
16. Januar 2017 at 15:21 #25951Hi steveplatto,
Please try following the same fix as airheader did here: https://www.max2play.com/forums/topic/another-synology-mounting-problem/#post-2580016. Januar 2017 at 15:17 #25950Hi mario and popper,
So sorry about the late response.Mario: Please try selecting the USB DAC option since the soundbar’s DAC is in fact connected via USB. Also, what do you refer to with the script mode? You can change the mode of the SBS in the settings under „user interface“.
Popper72: Both your linked topics are still active, so will try to solve your issues there. Our installation of the LMS is pretty straightforward, you might also want to contact the slimdevices forums with specific issues with that software.
16. Januar 2017 at 15:01 #25949Hi nickc,
Sorry about the late response. While we cannot offer you a simple button, the user nonchalant actually managed to find a solution for line-in support for the Cirrus Logic card: https://www.max2play.com/en/forums/topic/using-multiple-inputs-with-max2play-on-rpi2cirruslogic-sound-card-independently/ -
