Forum Replies Created
-
2. Dezember 2015 at 19:13 #17106
Hi giacva,
thanks for your hint. We fixed this issue. PVR addons should be available again in your Kodi menu.
Which version of Kodi would you like to install? Your question seems to be incomplete.
Regards
Maximilian from Max2Play
26. November 2015 at 11:21 #17035Hallo!
Update 2.25 ist jetzt verfügbar, mit dem Max2Play die Hintergrundbeleuchtung automatisch ausschaltet. Nach Aktualisierung von Max2Play muss im Menü „Raspberry Pi Einstellungen“ ein „Kernelupgrade“ durchgeführt werden und nach einem Neustart unter „Jivelite“ eine Neuinstallation von Jivelite durchgeführt werden, vorzugsweise der vorkompilierten Version.
Maximilian von Max2Play
25. November 2015 at 20:09 #17029Hi zorrotenai/Paolo,
the resolv.conf file within the „/run/“ folder has no effect, because it is created during runtime. The resolv.conf in „/etc/“, though, is the file your device receives from your router to save information about your last connection. As your router cannot resolve „max2play/“, it seems it didn’t find your Max2Play device within the network. We don’t know much about your router and how it handles DHCP (dynamically providing IP addresses in your network) and cannot provide more detailed information, sorry. You could also contact the manufacturer of your router device about this issue.
Best regards
Maximilian from Max2Play
25. November 2015 at 20:03 #17028Hi Yasmail,
try out these steps to solve the problem with a workaround.
Coming with the next update of Max2Play, WiFi should work with any language again.[Update] Version 2.25 is out now. WiFi should work now with every system langauge chosen in Max2Play. Does it work now?Regards
Maximilian from Max2Play
25. November 2015 at 20:00 #17027Hallo rel,
es sieht so aus, als würde immer noch ein IQaudIO-Dac als Soundkarte voreingestellt sein. Folglich kann auch dein USB-DAC nicht betrieben werden. Welche Einstellung kannst du unter Raspberry Pi Einstellungen sehen?
Welchen Raspberry Pi nutzt du? Es sieht so aus, als wäre es kein Raspberry Pi 2? Volle Unterstützung können wir nur dafür gewährleisten. Ich empfehle, über einen Umstieg nachzudenken und das USB-DAC damit zu betreiben. Stelle deine Frage noch zusätzlich in einem Raspberry Pi-Forum und erkundige dich nach der Kompatbilität des DACs mit deinem Raspi.Maximilian von Max2Play
25. November 2015 at 19:50 #17026Hi Shodan,
thanks for your question.
One solution is to extract the link launching Kodi in the Max2Play interface. To do this, enter the interface and the Kodi menu and click „Kodi /XBMC Start“. You will find the section saying „Xbmc.php?action=start“. Simply create a bookmark using the shown URL up to this section in your smartphone browser and pin it to your homescreen.
Does it work for you?
Maximilian from Max2Play
25. November 2015 at 19:41 #17025Hi elemay,
as far as we know, the HiFiBerry AMP+ does not support mono output. I suggest to contact HiFiBerry about this question and share the answer with us here.
Best regards
Maximilian from Max2Play
25. November 2015 at 19:34 #17024Hi K.Rens,
that’s not worth it. On the long run, we plan to drop Jasper (which is maintained insufficiently) and move on to speech control via Google Now and Siri (maybe also Cortana) to enable the interaction between smartphones and Max2Play. Certain additional apps and of course the assistants‘ APIs have to be used, though. At the end, we will publish a Max2Plugin that lets you choose your assistant and lists all available commands and necessary instructions to set it up. You might be able to add custom commands as well. But all this will take some time.
If you have an Android smartphone, you could test it meanwhile with installing the (not free) „Tasker“ app. In the max2play-interface, starting a Squeezelite player for example is done by a certain URL shown after clicking the „Start“-button (… Squeezeplayer.php?action=start …). You could link this URL and your command text in Tasker and control your Raspberry Pi with a Google Now speech command from then on.
Would be great if you shared your experiences with it.Maximilian from Max2Play
25. November 2015 at 18:44 #17023Hi Gerhard,
thanks for your question.
Our TFT case use the same GPIO pins like the HiFiBerry AMP+ does. Therefore, both boards can’t be run at the same time. We also see no option to remove this hardware limitation.
Maximilian from Max2Play
24. November 2015 at 18:47 #17015Hi acuncolta,
we could identify the problem with wifi. Your Max2Play system language should be French, right? Please change your language in the „Settings/Reboot“ menu to english and try to setup a wifi connection once again. Coming with the next Max2Play update, it will be possible of course to choose other languages without affecting the stability of your wifi.
Please tell us whether it is working for you now.
Best regards
Maximilian from Max2Play
Hi Yasmail,
try out these steps to solve the problem with a workaround.
Coming with the next update of Max2Play, WiFi should work with any language again.Regards
Maximilian from Max2Play
24. November 2015 at 14:02 #17011Hi franky384,
sorry for the inconvenience. You should be able to successfully install Clementine on your ODROID U3 after updating your new Max2Play image to the latest beta build (Settings/Reboot-menu). The changes will be included in the stable builds lateron.
Best regards
Maximilian from Max2Play
24. November 2015 at 13:56 #17010Hallo Calle,
wir haben mit dem Triode Spotify Plugin gute Erfahrungen gemacht und gehen davon aus, dass der parallele Betrieb beider Spotify-Plugins (also auch des offiziellen) zu Problemen führt. Deaktiviere also bitte testweise das offizielle Spotify Plugin und nutze bitte Triode.
Beste Grüße
Maximilian von Max2Play
24. November 2015 at 13:09 #17004@sharky01: Danke für den Hinweis, tatsächlich klappte auch unsere Jivelite-Testinstallation mit dem NOOBS-Image vor einigen Tagen nicht. Wir haben es daher aus unserer Downloadrubrik entfernt und werden bei Gelegenheit eine korrigierte Version anbieten.
Maximilian von Max2Play
24. November 2015 at 13:03 #17003Hallo sharky01,
meinst du wirklich Jivelite oder den Squeezeboxserver? Auf unserem Testserver haben wir dieses Problem vor ein paar Tagen ebenfalls beobachtet und hoffen, dass diese Squeezeboxfunktion bald wieder einwandfrei läuft.
Betreibt zufällig jemand einen Squeezeboxserver unabhängig von Max2Play und erhält ebenfalls keine Cover Art bei Radiostationen?
Maximilian von Max2Play
20. November 2015 at 12:52 #16972Hi there!
Meanwhile, the IQaudIO Pi-DAC+ is available in our store as well as the official IQaudIO Pi-CASE+.
You also have the possibility to preorder the bundle with our special IQaudIO Max2Play image. The image will be finished soon.
What do you think about it?
Best regards
Maximilian from Max2Play
20. November 2015 at 12:42 #16970Hi cowonaut,
thanks for your great input. We added your portability concept to our idea list, but unfortunately, I cannot promise we will work on it in the near future.
Best regards
Maximilian from Max2Play
13. November 2015 at 11:17 #16896Zu beachten ist, dass der gleichzeitige Betrieb einer Soundkarte und eines Displays immer nur dann möglich ist, wenn ein Display wie das 7″ über den Display Connector des Raspberry Pi angeschlossen werden kann. Displays, die wie der 2,4″ und 2,8″ die GPIO-Steckleiste nutzen, belegen schließlich den Platz für die Soundkarten.
Maximilian von Max2Play
13. November 2015 at 11:06 #16895Hi lucky51179,
ohne genauere Angaben kann ich erst einmal nur vermuten, dass du Max2Play noch aktualisieren (im Einstellungen/Reboot-Tab) und in Jivelite das „Joggler Skin“ wählen musst. Nur darin sind die Hintergrundbilder und Uhr-Bildschirmschoner enthalten.
Maximilian von Max2Play
12. November 2015 at 15:02 #16889Hallo ulip,
danke für deinen Vorschlag.
Leider ist das in diesem Fall nicht so leicht möglich, die Access Point-Funktionalität mittels Knopf ein- und auszuschalten. Im Hintergrund finden sehr große Veränderungen an bestimmten Konfigurationsdateien statt, daher bleibt vorerst nur der Weg der De- und Reinstallation, um diese Änderungen zuverlässig durchführen zu können. Der Vorgang dauert ja auch nicht lange.
Freut uns, dass dir Max2Play gefällt!
Maximilian von Max2Play
12. November 2015 at 14:57 #16888Hi waterdrinkingman,
thanks for your question.
This issue could be related to restrictions of HTML content you are allowed to post. Have you already tried out the „code“ button above?
I used the code button for this sentence.Best regards
Maximilian from Max2Play
6. November 2015 at 16:19 #16796Hi mbambi,
you could try out the following steps:
In the M2P interface, enter the „Raspberry Settings“ menu and check whether your soundcard is set correctly. If not, change it, reboot and try again. The sound card should also be selected in „Audioplayer“ -> Squeezelite -> Advanced settings.
Make sure to stop KODI and Shairport before starting a Squeezelite Player. If it makes sense for your setup, disable „Autostart“ for KODI and Shairport to prevent this issue in the first place.
Best regards
Maximilian from Max2Play
30. Oktober 2015 at 18:10 #16655Hi formicula1979,
thanks for your question.
I assume you are using several devices and Squeezelite Players and therefore, want to organize them with unique names. The easiest way is to rename your Max2Play devices in the „Settings/Reboot“ menu. This name is also used for the Squeezelite Player, that’s why your entries are overwritten on reboot.
If you have several Squeezelite Players on one device by using „Multisqueeze“, you can change the name by entering the commandline parameter „n
“ within the advanced options of your Squeezelite Players. Check out this and other parameters for Squeezelite Players here. Regards
Maximilian from Max2Play
22. Oktober 2015 at 18:04 #16525Hi Pastinakel,
thank you very much for sharing this with us. Definitely cool thing we will consider in future updates as an optional feature.
Running an LMS version 7.8 and above, the Squeezebox plugin „Shairtunes 2“ emulates Airplay and, therefore, is a good combination. Your solution, consequently, makes sense for owners of Squeezeboxes running older versions of LMS (e.g. 7.7).Best regards
Maximilian from Max2Play
22. Oktober 2015 at 17:55 #16524Hi there!
We have already contacted the manufacturer of IQaudiO DAC+ soundcards to address this issue. We will add specific configurations coming with the next update for Max2Play and are also working on a Max2Play image expecially for IQaudiO DACs.
Best regards
Maximilian from Max2Play
21. Oktober 2015 at 12:12 #16461Hi Dan,
first of all, we need to understand what exactly you mean by „DTS passthrough“. We guess you are talking about the drop in quality of certain music files during HDMI playback on your Squeezebox server, e.g. FLAC files with 32 bit rate and 96 KHz sampling rate are played back with 16 bit and 48 KHz only.
If so, you should definitely try out the following steps to keep the original sound quality: Enter your Max2Play interface and go to „Raspberry Settings“. On the page, look for the section „Change HDMI Settings for Display Resolution, Framerate and Audio“ and activate „Enable High-Resolution Audio on HDMI“ by choosing „Max2Play Kernel with 192 Khz enabled“.Please let us know what your results are.
Best regards
Maximilian from Max2Play
15. Oktober 2015 at 9:48 #16374Hi Raymond,
we have not tested the clock screensavers with the 2,8 inch display so far, but it should work with it, too. Ironically, we guess there is a risk of a screen burn-in with the 2,8 inch display, so be careful when testing on your own.
Glad you got your second device working.
Maximilian from Max2Play
14. Oktober 2015 at 9:44 #16349Hi Raymond,
great news! We added your requested feature to Jivelite. Both an analog and a digital clock are now available in the screensaver menu after updating Max2Play to the beta channel.
Please have a first look:
Analog clock
Digital clock
What do you think about it?
Maximilian from Max2Play
12. Oktober 2015 at 17:58 #16319Hi d4n3ll,
thank you for your input.
Do you know more details about what is necessary to implement this feature? For example kernel changes, Squeezelite playback via HDMI, …
Kind regards
Maximilian from Max2Play
7. Oktober 2015 at 17:55 #16105Hi velberrocks,
please check if you have set a static IP in the Max2Play WiFi/LAN menu. If so, remove it and try again.
Regards
Maximilian
7. Oktober 2015 at 17:49 #16103Hi Patrick,
thank you for contacting us.
I recommend to restart with a default Max2Play image, create a new Squeezebox server and connect your hard drive afterwards.
Regards
Maximilian
-
