Forum Replies Created
-
-
16. Januar 2017 at 14:53 #25948
Hi apakett,
I am not sure since we do not use UUSB DAC’s in our offices. It might depend on your specific model. Some are limited in their sample rate. You might want to try posting issue in the slimdevices forums, there is a similar post already: http://forums.slimdevices.com/showthread.php?106723-Issues-with-usb-DAC-sample-rate16. Januar 2017 at 14:45 #25947Hi Munich,
Thanks for sharing your solution. We will look into the possibility of integrating it in our OS.16. Januar 2017 at 14:36 #25946Hi TIA,
This might be a problem of the software you are using to control the server. Have you tried another app or software? Also, the LMS supports DLNA as well and thus could replace your UPNP server. However, otherwise the problem could lie with this third party server itself. There might also be an option to rescan your library in this software.16. Januar 2017 at 14:33 #25943Moin Matthias,
You should definitely be able to install the 7.9 nightly version of the Squeezebox Server. Please try burning a fresh image and installing the version 7.9 nightly since it is the only one that is fully supported (we will make this clearer in the future and also make it the default selection to prevent confusion).
Usually, after the installation the LMS takes a few moments to establish itself resulting in the link of the big button not displaying anything. But this should be gone after a reboot.16. Januar 2017 at 14:27 #25940Hi Brrutherb,
Sorry about the late response. The Raspberry Pi 3 can actually support more than one Audioplayer at once. Wich is why we created the plugin MultiSqueeze to run multiple instances of Squeezelite on one Pi.
The dropouts of the radio might be connected to your internet connection if the playback of local music files does not produce any errors. You might want to try that out in order rule out this source of error. Also, you could try to use a LAN connection if you are currently using WiFi.16. Januar 2017 at 14:22 #25938Hi heinzelrumpel,
Do all your devices have this issue in the same vein or do their drop-outs differ? You might also want to try disabling the built-in WiFi (Raspberry Settings) to rule it out as a source of error.13. Januar 2017 at 18:35 #25908Einige der Menüpunkte sind spezifisch für das von uns angepasste Joggler Skin. du kannst dieses installieren im Jivelite-Menü des Webinterface.
13. Januar 2017 at 18:34 #25907It’s the same option JCU mentioned. The move to the secondary interface ceases its activity.
13. Januar 2017 at 18:10 #25904Hi jcu,
Wir versuchen natürlich unsere neuen releases und dessen Dokumentation so zeitgleich wie möglich zu veröffentlichen. Bei unserem rasant sich veränderndem System kann dies jedoch manchmal etwas dauern. Wir bitten um Verständnis und hoffen, dass der aktuelle Stand des Changelog aussagekräftig genug ist.13. Januar 2017 at 18:03 #25902Hi tparvais,
Sorry about our late response. Please share your setup and the steps you have taken so we can try solve your issue.13. Januar 2017 at 17:59 #25898No, just try starting the playback via the LMS web interface (IP:9000 in any browser) to rule out your app as a (-n unlikely) source of error.
13. Januar 2017 at 17:48 #25896Hallo Jürgen,
Ich habe in diesem Topic nochmal zwei verschiedene Wege die zu deinem Ziel führen könnten aufgeführt:13. Januar 2017 at 17:43 #25895Hallo holzwurm,
Dieses Topic könnte dir weiterhelfen: https://www.max2play.com/forums/topic/mono-output-with-squeezelite-and-iqaudio-pi-digiamp/#post-24360Der Parameter für Monooutput ist o- mono
13. Januar 2017 at 17:42 #25894Hi bjarne,
Yes, this should work, shairport also has command line options in the Audioplayer menu. Try it out!13. Januar 2017 at 17:36 #25893Hi Iwan,
We made some fixes for the gmediarenderer and should be working again. Please try with a fresh image and updating to our newest version.13. Januar 2017 at 17:33 #25892Hi Hilary,
Sorry about the late response. I tested your URL and got it to work on our test device. Please try entering just:http://tunein.com/radio/KPFA-941-s34653/In your LMS‘ web interface in the internet radio segment.
13. Januar 2017 at 17:26 #25889Hi Haecksler and oli,
You might want to check out this solution by user nonchalant: https://www.max2play.com/en/forums/topic/using-multiple-inputs-with-max2play-on-rpi2cirruslogic-sound-card-independently/13. Januar 2017 at 17:24 #25888Hi max,
So sorry about the late response. Have you tried deactivating Kodi and its autostart yet?13. Januar 2017 at 17:21 #25886Hi lynoo,
So sorry about the late response. Your topic must have gotten overlooked previously. Please try out the HW volume control to streamline your audio output: https://www.max2play.com/en/wiki/optimizing-squeezelites-volume-control/
Also, please try instigating the playback from the native LMS webinterface to rule out your app as a source of error.13. Januar 2017 at 17:17 #25883Hi robi,
Sorry about the late response. I moved your topic to the Ideas/Wishes forum. We will consider this request in future development.13. Januar 2017 at 17:14 #25880Hi guys,
We also have an option in our Raspberry Settings to completely turn off the built-in WiFi.13. Januar 2017 at 17:13 #25879Hallo knorke,
Sorry bezüglich der verspäteten Antwort. Du kannst das WaveInput Plugin des Squeezebox Servers austesten: http://forums.slimdevices.com/showthread.php?49584-Announce-WaveInput-for-Linux
Damit ließe sich solch ein Setup wahrscheinlich verwirklichen.13. Januar 2017 at 17:04 #25878Hallo Patrick,
Hier findest du eine Übersicht aller Power-Buttons und dessen Funktion von Jivelite: https://www.max2play.com/en/wiki/jivelites-powerbutton/
Du kannst aktuell zudem mehrere Uhrenmodelle auswählen als Bildschirmschoner.13. Januar 2017 at 17:00 #25877Hi Chris,
As mentioned in your other thread, please check out this solution by nonchalant: https://www.max2play.com/forums/topic/using-multiple-inputs-with-max2play-on-rpi2cirruslogic-sound-card-independently/13. Januar 2017 at 16:58 #25876Hi Kim,
You can find the MAC Address of each Max2Play device by checking the Debug Info of the WiFi/LAN menu in the web interface.13. Januar 2017 at 16:52 #25874Hi Chris,
So sorry about the late response. Our team was away during the Holidays through New Years and we are now catching up with all your requests.
Unfortunately, we do not currently have a built-in solution for Line Input. However, multiple users in these forums have created their own solutions for their specific setups. You can find many of them by searching for Line In in our topics view of the forums. Here is an especially detailed one on the use of the Cirrus Logic Card for Line Input: https://www.max2play.com/en/forums/topic/using-multiple-inputs-with-max2play-on-rpi2cirruslogic-sound-card-independently/13. Januar 2017 at 16:26 #25872Hallo Tobi,
Der SD-Kartenschreibschutz bezieht sich nur auf Max2Play, dessen Webinterface und User. Wenn du per sudo als Superuser Befehl erteilst werden diese trotzdem ausgeführt.13. Januar 2017 at 16:22 #25871Hi steve,
Sorry about the late response. Please try setting up a specific share and user login to avoid confusion. If you still cannot mount the share in Max2Play, please try mounting it on your computer or another device. If you are successful in this, please replicate all the parameters you entered on your PC in Max2Play.13. Januar 2017 at 16:19 #25870Thanks for the great tips, JCU!
If you have had success with this procedure, Oswald, please let us know.
13. Januar 2017 at 16:18 #25869Hi HeinzelRumpel,
Sorry about the late response. I just tested 2,8″ waterott screen with a Raspberry Pi 3 and our newest image. I did, unfortunately, not encounter your error. Please try burning a fresh image, installing the RPi Display, selecting the 2,8″ installation, rebooting, selecting the QVGA skin installation in Jivelite, rebooting and check the output again. Our test Pi showed the correct skin immediately, but you might have to go to settings and select the skin that’s written in ALL CAPS. -
