Mbydeen

Forum Replies Created

Viewing 30 posts - 121 through 150 (of 309 total)
1 2 3 4 5 6 … 9 10 11
  • Back to forum
    Posted in: Enjoy Music in Bedroom and Bath – Alarm, Sleeptimer, Integrated Button Control
  • Mbydeen
    5. April 2017 at 11:35 #27995

    Hi p.jeremie

    This problem could be happened because you are using a slow SD card, we recommend you to use the class 10 SD card to burn Max2Play image, and if you having trouble in burning the image, please check the following link:

    https://www.max2play.com/en/wiki/burning-the-image-onto-memory-card/

    Regards,
    Mohammad Mbydeen

    Mbydeen
    4. April 2017 at 11:23 #27977

    Hi airheader911

    Please make sure that you have the latest version of Max2Play which is 2.41 and when you are trying to update Kodi, please make sure to click on the ‘Upgrade Kodi to the latest Version’ and not ‘Choose Kodi/XBMC-Package by http-link (package must be .deb) for Update’.

    Moreover, make sure that you have the Raspbian GNU/Linux 8.0 (jessie).

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    4. April 2017 at 11:20 #27976

    Hi ChristofS

    Please make sure that you have the latest version of Max2Play which is 2.41 and when you are trying to update Kodi, please make sure to click on the ‚Upgrade Kodi to the latest Version‘ and not ‚Choose Kodi/XBMC-Package by http-link (package must be .deb) for Update‘.

    Moreover, make sure that you have the Raspbian GNU/Linux 8.0 (jessie).

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    4. April 2017 at 8:58 #27972

    Hi stefanw,

    Please check out the following links, that might help recover the system:

    http://stevenhickson.blogspot.de/2013/04/how-to-fix-raspberry-pi-boot-problems.html

    http://raspberrypi.stackexchange.com/questions/7489/recover-files-from-broken-sd-card-no-boot

    Regards,
    Mohammad Mbydeen

    Mbydeen
    3. April 2017 at 13:47 #27960

    Hi liminal

    You can connect Echo Dot to Max2Play via Bluetooth and install Spotify as plugin on LMS,and you can use Airplay enabled receivers by enabling shairtunes on Max2Play.

    Also Max2Play support USB DAC and Pi Zero.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    3. April 2017 at 13:19 #27959

    Hi stefanw,

    Have you tried to burn new image and boot again ?, it could be that system files have been damaged.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    3. April 2017 at 12:37 #27958

    Hi sfraser131

    yeah, you could install USB/gigabit Ethernet dongle on a RPi3 running Max2play.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    3. April 2017 at 11:11 #27955

    Hi doctor_big,

    It could be a power supply problem or network problem, please make sure that you are using the suitable power supply and if you are connecting the player via WiFi, make sure it does not loose connection due to low quality signal, some routers cache the IPs for short time.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    30. März 2017 at 10:00 #27898

    Hi bobertuk

    Changed some Things in the Code of max2play to deal with the changed frequencies.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    29. März 2017 at 15:06 #27896

    Hi bobertuk

    Please update Max2play version to latest beta version, this problem has been fixed to give the right configuration to Equalizer on Ubuntu 16.04 LTS.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    29. März 2017 at 11:29 #27895

    Hi fullerms

    Have you installed Squeezelite Bluetooth Connection Sync on the Bluetooth plugin page. After installation you can link the Audioplayer Squeezelite Power-Status with the connection status of your chosen Bluetooth Speakers (click „reconnect“ to select).

    Important: Add „-B“ to the command line options of your Squeezelite player (on Audioplayer Tab or in Multisqueeze for the instance that uses the BT-Speakers).

    If you have problems with Bluetooth, please post it on:
    https://www.max2play.com/en/forums/topic/bluetooth-addon-beta/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    29. März 2017 at 11:17 #27894

    Hi eric nobel

    Please check the following ‚How-to‘ article, on how to configure spotify plugin :

    https://www.max2play.com/en/how-tos/howto-spotify/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    28. März 2017 at 13:26 #27888

    Hi martin-s

    There is no problem with the built-in WiFi on the Raspberry Pi 3, and our software is fully compatible with it, please make sure that WPS in enabled on your router, it take a little bit to connect to the WiFi via WPS when the device is booting.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    28. März 2017 at 12:10 #27886

    @ gtj

    Sorry for that.
    but there is no problem with Hifiberry Digi +, we tested in our lab and it works fine.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    28. März 2017 at 11:41 #27885

    Dear anesthesia

    We are working on CEC to support most of the TVs,the button selection differs on every remote.Maybe you can wait for an update to solve this issue.
    Sorry for that.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    28. März 2017 at 11:12 #27878

    Hi fullerms

    You can post your questions that is related to jivelite development on Logitech forum , to get more ideas about that:
    http://forums.slimdevices.com/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    27. März 2017 at 15:02 #27872

    @ GTJ,

    Please dont forget to update Max2Play version to the latest one, which is 2.41, many problems could be solved by only an update, now there is no option to roll back to the previous versions.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    27. März 2017 at 14:46 #27871

    Hi Paden

    It could be the filesystem format is causing the problem, please try to change the file system form vFAT to CIFS or NFS.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    27. März 2017 at 14:15 #27868

    Hi fullerms

    Should be possible – if you know how to Change it with the console, there is no way to do it with the web interface.

    Regards,
    Mohammad

    Mbydeen
    27. März 2017 at 13:59 #27867

    Hi petercoxphoto

    Have you enabled the checkbox Switch audio output on disconnect in the Bluetooth plugin ?
    Have you tried to reinstall the Bluetooth plugin ?
    What is the version of max2play that you have ?

    Regards,
    Mohammad Mbydeen

    Mbydeen
    27. März 2017 at 13:42 #27866

    Hi anesthesia
    Have you tried to reinstall CEC-Support for HDMI ?

    Please note that CEC-Support for HDMI to control Jivelite and Desktop with your TV’s remote control. This compiles and adds libcec-daemon to the autostart of Max2Play. You need a HDMI-Cable that supports CEC (some thin cables do not!) and the TV must be turned on before starting Max2Play as it needs to recognize the CEC-Device on boot.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    27. März 2017 at 13:09 #27865

    Hi knutmi

    Please send us more details about problem maybe also a screenshots, which RPI and camera are you using ?, have you updated Max2Play version to 2.41 ?

    Regards,
    Mohammad Mbydeen

    Mbydeen
    27. März 2017 at 12:42 #27864

    Hi jono,

    Max2play does not provide this feature at the moment, but if you how to write a code maybe you can use our ‚plugin builder‘ plugin to make it possible, here is the plugin link:

    https://www.max2play.com/en/portfolio/plugin-pluginbuilder-2/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    22. März 2017 at 12:29 #27829

    Hi petercoxphoto

    Please make sure that the Bluetooth speakers are not faraway form the RASPI and make sure that you are using a good quality power supply.

    Regards,
    Mohammad Mbydeen

    Mbydeen
    21. März 2017 at 12:51 #27821

    Hello ltjimdangle

    You can select different different players form the LMS right corner, and play different music.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    21. März 2017 at 11:29 #27819

    Hi paeber

    Here is some resources regarding pairing Bluetooth devices using Python, I hope it would help !!

    http://stackoverflow.com/questions/37465157/pairing-bluetooth-devices-with-passkey-password-in-python-rfcomm-linux

    https://people.csail.mit.edu/albert/bluez-intro/c212.html

    and please next time, you can post these kind of questions regarding development on the section of Max2Play Development (Ideas, Wishes)

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    21. März 2017 at 11:04 #27818

    Hi MartinB

    Thank you for your idea, We will take your suggestion into consideration.

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    21. März 2017 at 10:49 #27817

    Hi arnaju

    Have you installed any incompatible LMS plugins ? Please try to burn new Max2Play image to the latest version, which is 2.41

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    20. März 2017 at 15:49 #27812

    Hi gv200

    How have you created the LMS clients ? have you used this procedure:

    http://forums.slimdevices.com/showthread.php?100893-HOW-TO-Squeezelite-player-on-Windows-8-step-by-step

    I think that mysqueezebox.com uses MAC address to register the players, and configure the LMS clients on Windows, maybe does not provide that. To be sure that is the reason, you could post this question on http://forums.slimdevices.com/

    Best Regards,
    Mohammad Mbydeen

    Mbydeen
    20. März 2017 at 15:14 #27809

    Dear denaja

    Please make sure that Deezer plugin is Enabled in LMS. for more info how to configure Deezer on LMS please take a look on the following link:
    https://support.deezer.com/hc/en-gb/articles/201185572-How-can-you-listen-to-Deezer-on-your-Logitech-Squeezebox-

    Best Regards,
    Mohammad Mbydeen

Viewing 30 posts - 121 through 150 (of 309 total)
1 2 3 4 5 6 … 9 10 11