JoshHeng

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 40 total)
  • 20. Februar 2019 at 15:14 #44533

    Hi Peter,
    Thanks for all the help. I’ll just wait for Heiner to get back to me.

    Thanks,
    Josh

    19. Februar 2019 at 16:49 #44528

    Hi Peter,
    1. On the ‚Mainroom‘ Raspberry Pi 3+ you have Squeezelite, Bluetooth and Multi-squeeze running. You are streaming sound from your USB soundcard and a device connected to the 3.5mm audio jack.You own a 3a 5v power supply wich you are using with your ‚Mainroom‘ Raspberry Pi+
    I have one Raspberry Pi 3+ running Max2Play with Squeezebox Server, Multi-Squeeze and Bluetooth. I also recently installed an OpenHAB server on it as well, but that is a completely separate process. The Pi is now called „Smartroom“ and is powered through a proper 5V 2.5A/3A power supply. It is connected to one amplifier through the 3.5mm audio jack, and is also connected to another amplifier through a USB soundcard.

    Your ‚Mainroom‘ Pi 3+, was working fine until suddenly the audio jack stoped working.It started working again After a software reinstall. The audio jack worked for aprox. 5 days before it stoped working again.
    Yes, and I needed to completely format and reflash the SD card. I really don’t want to do this again if possible.

    At the end of January the audio jack still doesn’t work, and you have almost given up on bluetooth to work also. However you do not uninstall the plugin.
    Yes, the audio jack doesn’t work. Bluetooth doesn’t work when going through Squeezebox, so I uninstalled it for a while but the audio jack didn’t start working again. I later reinstalled it.

    2. February: Your installation has changed you are no longer streaming/playing from one Raspberry pi 3+ ‚Mainroom‘ with a USB card and a 3,5mm audio device. The second device is called ‚desk‘ player. The second player also have a defect audio jack. You tried with the same SD card and sound cards with the same result and therefore think that the problem is the software.
    No, I am still using the single Raspberry Pi with multisqueeze (which allows multiple players). I have tried using a different Pi, power supplies and soundcards however these have the same result, so yes, I do think that the problem is the software.

    3. On the 18th you send me your Pi’s boot report (Demsg) from a Raspberry Pi called ‚Soundsystem‘ properly with new installed software and clearly not the same as the Pi called ‚Mainroom‘. Maybe a third PI??.
    The single Pi called „SoundSystem“ is the same Pi I used all along. „Mainroom“ and „Desk“ are just names of the Multisqueeze players.

    A finally one of the first thing I asked you to do was telling me the status of the settings of Squeezelite and Shairport in the Audioplayer tab. On the 15th. you told me that the status was: Active: inactive (dead). also not running.

    On the 18th you wrote: I disabled the autostart of Squeezelite and Shairport in the AudioPlayer tab, however they still seem to start and run and the 19th you wrote: I cannot stop squeezelite and shairport (Trying to stop … could NOT stop process – try kill instead) and sometimes kill does not work. When I do manage to kill the processes, once I reload the page they have started again. The checkboxes are unticked.
    Yes, that is correct. I still don’t really understand what the statuses meant when I sent them to you.

    I now know that there are only one person who can solve the mystery of the sudden death of the auxiliary output!!!

    And that person needs to find out who, how and what in the chase of the unstoppable process!! first.
    I don’t really know what you mean

    Until then I wish you a happy reinstalling!!
    If possible, I really don’t want to reinstall everything as it will take me a long time to get everything reconfigured. I can reinstall individual software but ideally I don’t want to get a new image.

    Thanks

    19. Februar 2019 at 2:05 #44518

    Hi Peter,
    Squeezelite and Shairport
    I cannot stop squeezelite and shairport (Trying to stop … could NOT stop process – try kill instead) and sometimes kill does not work. When I do manage to kill the processes, once I reload the page they have started again. The checkboxes are unticked.

    Bluetooth Settings
    Bluetooth just streams directly to the Squeezebox server so there is no option. Bluetooth also doesn’t work this way, but that’s another matter.

    Thanks,
    Josh

    18. Februar 2019 at 11:12 #44499

    Hi Peter,
    I tried following your steps but it hasn’t fixed the issue

    I disabled the autostart of Squeezelite and Shairport in the AudioPlayer tab, however they still seem to start and run.

    Thanks,
    Josh

    18. Februar 2019 at 1:37 #44486

    Hi Peter,
    Sorry for the late reply.

    Dmesg Response
    cat /proc/asound/cards
    aplay -l

    Thanks,
    Josh

    16. Februar 2019 at 0:55 #44466

    Hi Peter,

    I tried using different power supplies
    I removed all unneeded plugins such as Bluetooth and RPi Camera
    I also removed my USB sound card and tried that.
    None of these methods worked.

    I believe that it is a software issue because I have tried multiple Raspberry Pis and power supplies, and the problem persists. This happened to me before and I could only solve it through a complete reset of the image (with the hardware the same), but the problem came back after around 1/2 weeks. I just don’t know that the issue is, or how to fix it without resetting the image again.

    Thanks,
    Josh

    15. Februar 2019 at 0:52 #44459

    Hi Peter,
    Thanks for helping me.

    I updated the kernel and packages but it still isn’t working.
    I also just SSHed directly instead of using the remote control plugin. This is what I got (which doesn’t seem right):

    sudo systemctl status shairport
    ● shairport.service - LSB: Script to start shairport
       Loaded: loaded (/etc/init.d/shairport; generated; vendor preset: enabled)
       Active: inactive (dead)
         Docs: man:systemd-sysv-generator(8)
    sudo systemctl status squeezelite
    ● squeezelite.service - LSB: Script to start squeezelite
       Loaded: loaded (/etc/init.d/squeezelite; generated; vendor preset: enabled)
       Active: inactive (dead)
         Docs: man:systemd-sysv-generator(8)

    If it helps, this is the result of sudo systemctl status:
    Link

    I’ll also attach the updated debug files:
    Multisqueeze
    Squeezebox
    Raspberry Settings
    Audioplayer
    Settings

    Thanks for the help again,
    Josh

    7. Februar 2019 at 23:25 #44417

    Hi Heiner,
    I’ve got two Raspberry Pis and I just swapped the one running Max2Play (ie the sound card, audio jack and SD card).
    The audio jack still doesn’t work, so it must be a software problem instead of a hardware problem (unless I have two broken Pis)

    7. Februar 2019 at 0:52 #44396

    Hi Heiner,
    I’ve tried the steps that you recommended but the audio jack still doesn’t seem to work.

    Thanks,
    Josh

    5. Februar 2019 at 18:09 #44387

    Hi,
    I’ve already tried that and looked at/changed other settings in that menu but it still does not work.

    Thanks,
    Josh

    5. Februar 2019 at 9:12 #44350

    Hi,
    I tried removing the C parameter and it still doesn’t work.
    I’ve also tried changing the order of multisqueeze players (ie the ‘mainroom’ player before the ‘desk’ player), however this doesn’t work too.
    Yes; the device is working fine, including its USB sound card, apart from the audio jack.

    Thanks, Josh

    1. Februar 2019 at 19:09 #44315

    Hi Heiner,
    The issue that I am having is that my squeezelite player called ‚mainroom‘ is not working. It uses the default auxillary 3.5mm output jack however there is no output coming out of it. This happened previously, and was working again after a complete reinstall/new image. Around 5 days after the new image, however, it stopped working again and has not been working ever since. I am reluctant to install a new image again as if this is a consistent issue it will become impractical.
    The performance in the Health Checker is normally less than 0.65 and the power supply is a proper 3A raspberry pi power supply. If power was an issue, I would have thought that the USB soundcard would not be working instead.

    My other squeezelite player ‚desk‘ which runs of a USB sound card works as intended.

    Thanks,
    Josh

    Health Checker
    Internet: Connected
    CPU Load: 0.60
    SD Card Usage: 14%
    Temp CPU: 51.5
    Power Supply: OK

    Multisqueeze Configuration

    • This reply was modified 5 years, 8 months ago by JoshHeng.
    31. Januar 2019 at 19:25 #44308

    Hi Heiner,
    Sorry for the late reply – I accidentally stopped email notifications so I didn’t receive your reply.
    I tried changing the Squeezebox/Squeezelite player audio sources and Raspberry Pi settings however these do not do anything.
    Is there any other way to fix the audio problem without formatting everything and starting again? This seems to be a recurring problem and it is not ideal to have to reinstall the entire system every time it stops working.

    I’ve now basically given up on BT as it is not working with Squeezebox at all (even though it does work natively). I am not using ethernet as it is impractical to get a cable from the router to the Pi. Despite this, I do not think that these would affect the audio output.

    Thanks,
    Joshua Heng

    18. Januar 2019 at 23:31 #43883

    Hi,
    I can confirm that the flatribbon cable is locked firmly in the camera slot.
    The camera is recognized (as otherwise there would be an error), but the image just doesn’t appear.

    Thanks,
    Josh

    18. Januar 2019 at 23:29 #43882

    Hi,
    I can confirm that the flatribbon cable is locked firmly in the camera slot.
    The camera is recognised (as otherwise there would be an error), but the image just doesn’t appear.

    Thanks,
    Josh

    18. Januar 2019 at 23:27 #43881

    Hi,
    Sorry to bump this thread however this issue has started occurring again. I’ve tried systematically changing the settings in Max2Play but nothing seems to work.
    Is there a way to reinstall all the audio drivers without reinstalling all of Max2Play again?

    Also, please could you remove the [SOLVED] tag on this thread.

    Thanks,
    Josh

    3. Januar 2019 at 15:15 #43081

    Hi Heiner,
    Happy New Year

    Yes, I meant the built-in audio jack. Since my last message, however, it started working again and has been working for the past week. If I do encounter this again, I will follow your instructions of looking at the Health Checker.

    Yes, I do use WiFi to connect to my LAN. I don’t think that this is a problem because using Bluetooth without going through Squeezebox does work fine.

    Thanks,
    Josh

    25. Dezember 2018 at 19:39 #42938

    Hi Heiner, have you got any recommendations of fixes that I could make?

    Thanks,
    Josh

    20. Dezember 2018 at 13:34 #42924

    Again, Bluetooth does not work. LMS switches to wavin:bluetooth, however that only lasts for around 1 second (and no audio is played through it).

    Thanks

    The Max2Play Debug File
    #### Bluetooth Installation ####

    #### Bluetooth Dongle ####
    hci0: Type: Primary Bus: UART
    BD Address: B8:27:EB:92:68:C6 ACL MTU: 1021:8 SCO MTU: 64:1
    UP RUNNING
    RX bytes:7182 acl:76 sco:0 events:143 errors:0
    TX bytes:4794 acl:71 sco:0 commands:71 errors:0

    #### DEVICE Joshua Heng’s iPhone ####

    #### DEVICE [TV] Joshua’s Computer ####

    #### DEVICE 49-AE-B2-41-F6-51 ####
    [49:AE:B2:41:F6:51]
    Name: (null)
    Alias: (null) [rw]
    Address: (null)
    Icon: (null)
    Class: 0x0
    Paired: 0
    Trusted: 0 [rw]
    Blocked: 0 [rw]
    Connected: 0
    UUIDs: [

    #### DEVICE 47-F6-17-FF-72-33 ####
    [47:F6:17:FF:72:33]
    Name: (null)
    Alias: (null) [rw]
    Address: (null)
    Icon: (null)
    Class: 0x0
    Paired: 0
    Trusted: 0 [rw]
    Blocked: 0 [rw]
    Connected: 0
    UUIDs: [

    #### DEVICE 4F-E8-E0-EC-E8-2E ####
    [4F:E8:E0:EC:E8:2E]
    Name: (null)
    Alias: (null) [rw]
    Address: (null)
    Icon: (null)
    Class: 0x0
    Paired: 0
    Trusted: 0 [rw]
    Blocked: 0 [rw]
    Connected: 0
    UUIDs: [

    #### BLUEALSA RUNNING ####
    1

    #### BLUETOOTH SQUEEZEBOX SERVER AUTOSTART ####

    The Max2Play Log

    Search
    Refresh (50, 100, 500, 1000 lines) Download
    [18-12-20 11:01:02.2809] Slim::Control::Request::renderAsArray (2233) Backtrace:

    frame 0: Slim::Utils::Log::logBacktrace (/usr/share/perl5/Slim/Control/Request.pm line 2233)
    frame 1: Slim::Control::Request::renderAsArray (/usr/share/perl5/Slim/Plugin/CLI/Plugin.pm line 697)
    frame 2: Slim::Plugin::CLI::Plugin::cli_request_write (/usr/share/perl5/Slim/Plugin/CLI/Plugin.pm line 1010)
    frame 3: Slim::Plugin::CLI::Plugin::cli_subscribe_notification (/usr/share/perl5/Slim/Control/Request.pm line 2058)
    frame 4: (eval) (/usr/share/perl5/Slim/Control/Request.pm line 2058)
    frame 5: Slim::Control::Request::notify (/usr/share/perl5/Slim/Control/Request.pm line 859)
    frame 6: Slim::Control::Request::checkNotifications (/usr/sbin/squeezeboxserver line 708)
    frame 7: main::idle (/usr/sbin/squeezeboxserver line 677)
    frame 8: main::main (/usr/sbin/squeezeboxserver line 1213)

    [18-12-20 11:01:08.2947] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:01:08.3212] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    2018-12-20 11:06:01 squeezeboxserver_safe stopped.
    2018-12-20 11:06:04 squeezeboxserver_safe started.
    [18-12-20 11:06:15.3157] main::init (387) Starting Logitech Media Server (v7.9.1, 1522157629, Fri Mar 30 12:27:11 CEST 2018) perl 5.024001 – arm-linux-gnueabihf-thread-multi-64int
    [18-12-20 11:06:17.8665] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:06:17.9354] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    [18-12-20 11:06:18.6595] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:06:18.7149] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    [18-12-20 11:06:21.6796] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:06:21.7059] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    [18-12-20 11:06:22.4088] main::checkDataSource (1110) Warning: Schema updated or no media found in the database, initiating scan.
    [18-12-20 11:06:22.7668] Slim::Control::Request::renderAsArray (2233) Error: request should set useIxHashes in Slim::Control::Request->new()
    [18-12-20 11:06:22.7687] Slim::Control::Request::renderAsArray (2233) Backtrace:

    frame 0: Slim::Utils::Log::logBacktrace (/usr/share/perl5/Slim/Control/Request.pm line 2233)
    frame 1: Slim::Control::Request::renderAsArray (/usr/share/perl5/Slim/Plugin/CLI/Plugin.pm line 697)
    frame 2: Slim::Plugin::CLI::Plugin::cli_request_write (/usr/share/perl5/Slim/Plugin/CLI/Plugin.pm line 1010)
    frame 3: Slim::Plugin::CLI::Plugin::cli_subscribe_notification (/usr/share/perl5/Slim/Control/Request.pm line 2058)
    frame 4: (eval) (/usr/share/perl5/Slim/Control/Request.pm line 2058)
    frame 5: Slim::Control::Request::notify (/usr/share/perl5/Slim/Control/Request.pm line 859)
    frame 6: Slim::Control::Request::checkNotifications (/usr/sbin/squeezeboxserver line 708)
    frame 7: main::idle (/usr/sbin/squeezeboxserver line 677)
    frame 8: main::main (/usr/sbin/squeezeboxserver line 1213)

    [18-12-20 11:06:28.5758] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:06:28.6020] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    [18-12-20 11:22:28.2262] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:22:28.2615] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    [18-12-20 11:22:34.5238] Slim::Utils::SQLiteHelper::postConnect (374) Optimizing DB because of missing or empty sqlite_stat1 table
    [18-12-20 11:22:34.5503] Slim::Schema::forceCommit (2149) Warning: Trying to commit transactions before DB is initialized!
    [18-12-20 11:26:00.1021] Slim::Control::Request::execute (1888) Error: While trying to run function coderef [Slim::Plugin::Favorites::Plugin::cliAdd]: [Can’t call method „string“ on an undefined value at /usr/share/perl5/Slim/Plugin/Favorites/Plugin.pm line 869.
    ]
    [18-12-20 11:26:00.1060] Slim::Plugin::CLI::Plugin::cli_process (640) Request [favorites] failed with error: Bad dispatch!
    2018-12-20 11:26:01 squeezeboxserver_safe stopped.
    2018-12-20 11:26:03 squeezeboxserver_safe started.
    [18-12-20 11:26:11.4563] main::init (387) Starting Logitech Media Server (v7.9.1, 1522157629, Fri Mar 30 12:27:11 CEST 2018) perl 5.024001 – arm-linux-gnueabihf-thread-multi-64int
    [18-12-20 11:28:31.4911] Slim::Plugin::CLI::Plugin::cli_process (640) Request [playlist] failed with error: Bad params!

    Log image

    20. Dezember 2018 at 13:12 #42916

    Hi Heiner,
    I have done a fresh reinstall and am currently setting it up again.
    For some reason, I can only connect to the web interface through the IP (192.168.1.151) instead of through max2play/ (which gives a too long to respond error).

    I will keep you updated about the Bluetooth issue.

    Thanks,
    Josh

    18. Dezember 2018 at 20:09 #42832

    Hi Heiner,
    I reinstalled the Bluetooth plugin and now it is not even starting.

    Thanks.

    Please see the error below:

    #### Bluetooth Installation ####

    #### Bluetooth Dongle ####
    hci1: Type: Primary Bus: UART
    BD Address: B8:27:EB:92:68:C6 ACL MTU: 1021:8 SCO MTU: 64:1
    UP RUNNING
    RX bytes:743 acl:0 sco:0 events:44 errors:0
    TX bytes:1029 acl:0 sco:0 commands:44 errors:0

    hci0: Type: Primary Bus: USB
    BD Address: 00:02:72:B0:00:26 ACL MTU: 192:8 SCO MTU: 64:8
    UP RUNNING
    RX bytes:1014 acl:0 sco:0 events:45 errors:0
    TX bytes:937 acl:0 sco:0 commands:45 errors:0

    #### BLUEALSA ERROR ####
    ● bluealsa.service – Start Bluealsa for Bluetooth on Alsa (not compatible with Pulseaudio)
    Loaded: loaded (/etc/systemd/system/bluealsa.service; enabled; vendor preset: enabled)
    Active: activating (start-pre) since Tue 2018-12-18 18:06:02 GMT; 50ms ago
    Process: 2570 ExecStart=/usr/bin/bluealsa -p a2dp-sink -p a2dp-source (code=exited, status=127)
    Main PID: 2570 (code=exited, status=127); Control PID: 2839 (sleep)
    CGroup: /system.slice/bluealsa.service
    └─control
    └─2839 /bin/sleep 2

    Dec 18 18:06:02 soundsystem systemd[1]: Starting Start Bluealsa for Bluetooth on Alsa (not compatible with Pulseaudio)…

    #### BLUEALSA RUNNING ####
    0

    #### BLUETOOTH SQUEEZEBOX SERVER AUTOSTART ####
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Logfile was modified.
    Reading last 10 l

    17. Dezember 2018 at 19:32 #42787

    Hi Heiner,
    Thanks for the reply.

    I’ve tried connecting my phone with Bluetooth again, however this time it won’t even connect.

    Max2Play Bluetooth Error
    If you connected Bluetooth Speakers, make sure to set the soundcard of your audioplayers to bluetooth as audio output! You need to restart your Audioplayer if the Bluetooth Device changed.
    If you connected a Smartphone to stream to Squeezebox Server, NO further setting to your soundcard is needed (do NOT set your soundcard to bluealsa)!
    Device D0:D2:B0:63:75:86 Joshua Heng’s iPhone
    trust D0:D2:B0:63:75:86
    Changing D0:D2:B0:63:75:86 trust succeeded
    pair D0:D2:B0:63:75:86
    Attempting to pair with D0:D2:B0:63:75:86
    Failed to pair: org.bluez.Error.AlreadyExists
    connect D0:D2:B0:63:75:86
    Attempting to connect to D0:D2:B0:63:75:86
    Failed to connect: org.bluez.Error.Failed
    quit
    Waiting to connect to bluetoothd…

    Max2Play Bluetooth Debug
    #### Bluetooth Installation ####

    #### Bluetooth Dongle ####
    hci0: Type: Primary Bus: UART
    BD Address: B8:27:EB:92:68:C6 ACL MTU: 1021:8 SCO MTU: 64:1
    UP RUNNING PSCAN
    RX bytes:13301325 acl:23620 sco:0 events:438 errors:0
    TX bytes:11612 acl:352 sco:0 commands:117 errors:0

    #### DEVICE Joshua Heng’s iPhone ####

    #### BLUEALSA RUNNING ####
    1

    #### BLUETOOTH SQUEEZEBOX SERVER AUTOSTART ####
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Running – Start Stream on Squeezebox Server
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Logfile was modified.
    Reading last 10 lines of /var/log/daemon.log
    Off – Stop Stream on Squeezebox Server (Restore Stream before Bluetooth)

    LMS Debug Information
    [18-12-09 09:26:50.4372] Plugins::ShairTunes2W::Plugin::handleSocketConnect (500) New connection from: 192.168.1.142
    [18-12-09 09:26:50.4440] Plugins::ShairTunes2W::Plugin::conn_handle_request (807) DACP-ID: 888D63465D3216CB, Active Remote: 3687874810
    [18-12-09 09:26:50.5702] Plugins::ShairTunes2W::Plugin::conn_handle_request (807) DACP-ID: 888D63465D3216CB, Active Remote: 3687874810
    [18-12-09 09:26:50.6374] Plugins::ShairTunes2W::Plugin::conn_handle_request (807) DACP-ID: 888D63465D3216CB, Active Remote: 3687874810
    [18-12-09 09:26:50.7036] Plugins::ShairTunes2W::Plugin::conn_handle_request (879) decode command: $VAR1 = ‚host‘;
    $VAR2 = ‚192.168.1.142‘;
    $VAR3 = ’socket‘;
    $VAR4 = 46619;
    $VAR5 = ‚fmtp‘;
    $VAR6 = ’96 352 0 16 40 10 14 2 255 0 0 44100′;
    $VAR7 = ‚cport‘;
    $VAR8 = ‚63698‘;
    $VAR9 = ‚tport‘;
    $VAR10 = ‚62282‘;
    $VAR11 = ‚latencies‘;
    $VAR12 = ‚1000:2000‘;
    $VAR13 = ‚codec‘;
    $VAR14 = ‚wav‘;
    $VAR15 = ‚iv‘;
    $VAR16 = ‚da936815cbbdd42a425e588d356a0a9c‘;
    $VAR17 = ‚key‘;
    $VAR18 = ‚f455f62726ca8778c122012cdd60589d‘;
    [18-12-09 09:26:50.7245] Plugins::ShairTunes2W::Plugin::conn_handle_request (897) Helper output: shairport_helper: VERSION: 0.103.3
    [18-12-09 09:26:50.7253] Plugins::ShairTunes2W::Plugin::conn_handle_request (908) launched decoder: Proc::Background=HASH(0x6a9d328) on ports: 34432/53575/33949/56037, http port: 36829
    [18-12-09 09:26:50.7378] Plugins::ShairTunes2W::Plugin::conn_handle_request (939) Playing url: airplay://192.168.1.151:56037/14931_stream.wav
    [18-12-09 09:26:50.7708] Plugins::ShairTunes2W::Plugin::conn_handle_request (1021) sending-> vol: 88
    [18-12-09 09:26:50.7842] Plugins::ShairTunes2W::Plugin::conn_handle_request (1021) sending-> vol: 88
    [18-12-09 09:26:50.8487] Plugins::ShairTunes2W::Plugin::conn_handle_request (957) Flush up to 21354, 81508338
    [18-12-09 09:26:50.8502] Plugins::ShairTunes2W::Plugin::handleHelperOut (593) From helper: flushed 21354
    [18-12-09 09:26:51.7617] Plugins::ShairTunes2W::Plugin::handleCoverConnect (540) New cover proxy connection from 192.168.1.150
    [18-12-09 09:26:51.7637] Plugins::ShairTunes2W::Plugin::handleCoverRequest (549) Image proxy request: GET /6093a31f18c6bcd89981ab1c236a81f2/cover.jpeg HTTP/1.1
    [18-12-09 09:26:51.7650] Plugins::ShairTunes2W::Plugin::handleCoverRequest (549) Image proxy request: Accept-Encoding: gzip
    [18-12-09 09:26:51.7663] Plugins::ShairTunes2W::Plugin::handleCoverRequest (549) Image proxy request: User-Agent: Jetty/9.3.21.v20170918
    [18-12-09 09:26:51.7675] Plugins::ShairTunes2W::Plugin::handleCoverRequest (549) Image proxy request: Host: 192.168.1.151:36829
    [18-12-09 09:26:51.7685] Plugins::ShairTunes2W::Plugin::handleCoverRequest (549) Image proxy request:
    [18-12-09 09:26:51.7993] Plugins::ShairTunes2W::Plugin::handleCoverRequest (577) Coverart sent 79575 over 79575
    [18-12-09 09:26:52.6100] Plugins::ShairTunes2W::Plugin::handleHelperOut (593) From helper: play
    [18-12-09 09:26:52.8280] Plugins::ShairTunes2W::Plugin::conn_handle_request (807) DACP-ID: 888D63465D3216CB, Active Remote: 3687874810
    [18-12-09 09:26:52.8532] Plugins::ShairTunes2W::Plugin::mDNSlistener (1135) Found remote: 888D63465D3216CB, 192.168.1.142:55417
    [18-12-09 09:28:00.7548] Plugins::ShairTunes2W::Plugin::handleSocketRead (625) Closed: IO::Socket::INET=GLOB(0x6b180c8)
    [18-12-15 06:41:01.5634] Slim::Player::Song::open (472) Warning: stream failed to open [https://radio.stereoscenic.com/ama-s].
    [18-12-16 22:54:55.7362] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can’t connect to remote server to retrieve playlist for, http://192.168.1.150:8080/audio/f23d32a0-139c-4522-9150-31b7329f2ddc.mp3: 404 Not Found.
    [18-12-16 22:55:16.5627] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can’t connect to remote server to retrieve playlist for, http://192.168.1.150:8080/audio/fb89efab-710b-4393-8d66-4a1ad44601da.mp3: 404 Not Found.

    • This reply was modified 5 years, 10 months ago by JoshHeng.
    14. Dezember 2018 at 19:24 #42768

    Hi Heiner,
    I think you interpreted my statement incorrectly.
    I directly streamed Bluetooth to the sound card as a test to see if it would work, and it did.
    I now have it disabled as I would like it to play through Squeezebox, however that doesn’t seem to work.

    Where do I find the debug information?

    Thanks again,
    Josh

    13. Dezember 2018 at 22:25 #42753

    Hi Heiner,
    Sorry to bother you again (and to bump this thread), but is this getting anywhere?

    Thanks,
    Josh

    9. Dezember 2018 at 14:59 #42620

    Ok, thank you for your help.

    Josh

    9. Dezember 2018 at 14:58 #42619

    Hi Heiner,
    I have already tried those fixes and it doesn’t work.

    Again, I think that is rather a problem of the Bluetooth output going into Squeezebox rather than Bluetooth itself, as sometimes I can play audio through Bluetooth directly to the sound card.

    Thanks,
    Josh

    4. Dezember 2018 at 23:13 #42567

    Hi,
    I am unable to wire an ethernet cable to my Raspberry Pi as it is a long way away from any router/switch and all Powerline adapters don’t seem to work well.

    I do have a 5V 3A power supply, and the only USB peripherals I have is one USB sound card.

    The health checker’s results:
    Internet: Connected
    CPU Load: 0.23
    SD Card Usage: 14%
    Temp CPU: 51.5
    Power Supply: OK

    Thanks, Josh

    4. Dezember 2018 at 23:12 #42566

    I am now not being able to connect with Bluetooth at all with my phone.

    I get this error with trying to connect on Max2Play:
    Device D0:D2:B0:63:75:86 Joshua Heng’s iPhone
    trust D0:D2:B0:63:75:86
    Changing D0:D2:B0:63:75:86 trust succeeded
    pair D0:D2:B0:63:75:86
    Attempting to pair with D0:D2:B0:63:75:86
    Failed to pair: org.bluez.Error.AlreadyExists
    connect D0:D2:B0:63:75:86
    Attempting to connect to D0:D2:B0:63:75:86
    Failed to connect: org.bluez.Error.Failed
    quit
    Waiting to connect to bluetoothd…

    ..And on my phone it just says unable to connect

    Thanks, Josh

    4. Dezember 2018 at 23:09 #42565

    Now there is just the Bluetooth issue – do you have any suggestions on fixes for this? Thanks

    4. Dezember 2018 at 22:52 #42563

    Hi Heiner,
    It seems like the problem has resolved itself since I last checked it.
    Thanks for the help anyway,
    Josh

    • This reply was modified 5 years, 10 months ago by JoshHeng.
Viewing 30 posts - 1 through 30 (of 40 total)