yakelkun

Forum Replies Created

Viewing 17 posts - 1 through 17 (of 17 total)
  • Posted in:
  • 6. Juli 2017 at 14:48 #29844

    Dear,
    chances that x2 different wifi router (different brand) with different network settings (different dhcp server) are causing the same error on the very same device are against odd, and moreover against statistic…

    Nevertheless I’ll make a fresh install and keep you informed.

    Note that my plateform is a Pi Zero W, the latest model with embeded wifi. Maybe an issue on the driver….

    22. Juni 2017 at 11:46 #29677

    The card is a similar (not to say a clone) to hifiberry hat…

    Hifiberry officially dosen’t support this function (marketing positionning) but the community was quick to find a way to make it work…

    I’ll try with another distribution to check if it works and let you know.

    22. Juni 2017 at 10:55 #29675

    I got no error messages triying it… but aleas no result at all… (even after rebooting)

    19. Juni 2017 at 11:41 #29602

    Have you checked on your router, whether the Pi connects right and why it is assigned that IP?

    this [email protected] doesn’t come from my DHCP. Note that I tried on two different routers with the same problem. both router serves 192.168.1.x+20 and y+20.

    Changing just the sdcard with v.l.m.o distribution and the Pi Zero gets the correct [email protected] on both routers.

    Yes load wifi interface is ticked, GUI allow me to find the different ssid available at my location, so wifi interface is up, but I don’t understand why it continuously get this 192.168.3.1 adress…

    15. Juni 2017 at 23:56 #29555

    Another try..
    soft vol

    but unsuccessfull…

    • This reply was modified 5 years ago by  yakelkun.
    15. Juni 2017 at 19:36 #29552

    Any clue please ?

    15. Juni 2017 at 19:34 #29549

    links…working

    • This reply was modified 5 years ago by  yakelkun.
    15. Juni 2017 at 19:32 #29548

    The raspiaudio hat :
    raspiaudio

    The trick to get soft volume control that doesn’t work aleas :
    hifiberry soft volume control

    Resume:
    The raspiaudio Hat works flawlessly with a RPi Zero W. It work like a Hifiberry clone.

    Only drawback, that is also true for majority of Pi Hat no native soft volume control. Lots of user found several ways to get it modifying the RPi config like the link I gave but it doesn’t seems to work with M2P…

    note: thank you for your support.

    13. Juni 2017 at 13:46 #29532

    Hello,
    I online updated Just before testing the Pi ZW.

    I dont use WPS as résultat date so-so in my experience.
    I use m2p gui to choose thé correct wifi succesfully enter the password.
    BUT I get always the same wrong 192.168.3.1 ip adress,

    • This reply was modified 5 years ago by  yakelkun.
    12. Juni 2017 at 11:39 #29500

    Sorry bad cut and ^paste

    9. Juni 2017 at 11:28 #29442

    I give it a try to volumio with the very same hardware.

    Minutes after I selected the same wifi network, one reboot later and it was working like a breeze.

    So there must be a configuration problem with Max2Play and the Pi Zero W…

    9. Juni 2017 at 9:20 #29439

    I changed the router and selected wifi thru webui succesfully using scanning function…

    But same résult :

    [email protected]:~ $ ifconfig
    eth0 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58
    inet adr:192.168.1.100 Bcast:192.168.1.255 Masque:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:461 errors:0 dropped:2 overruns:0 frame:0
    TX packets:309 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:1000
    RX bytes:42035 (41.0 KiB) TX bytes:46080 (45.0 KiB)

    lo Link encap:Boucle locale
    inet adr:127.0.0.1 Masque:255.0.0.0
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:362 errors:0 dropped:0 overruns:0 frame:0
    TX packets:362 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:1
    RX bytes:35718 (34.8 KiB) TX bytes:35718 (34.8 KiB)

    wlan0 Link encap:Ethernet HWaddr b8:27:eb:36:9e:87
    inet adr:192.168.3.1 Bcast:192.168.3.255 Masque:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:68 errors:0 dropped:0 overruns:0 frame:0
    TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 lg file transmission:1000
    RX bytes:17348 (16.9 KiB) TX bytes:28762 (28.0 KiB)

    [email protected]:~ $ iw dev
    phy#0
    Interface wlan0
    ifindex 2
    wdev 0x1
    addr b8:27:eb:36:9e:87
    ssid GetOut
    type managed
    channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz

    So it’s not related to the router (who works flawlessly by the way with lots of devices)

    Any clue please ? Or a way to use static IP…

    1. März 2017 at 15:02 #27376

    Happy to help !!

    1. März 2017 at 9:11 #27360

    Thank you for your answers.

    I recieved some info about LMS / Airtune switch, applying the instruction works well thanks.

    5 what are the settings as my Android ain’t see the RPi 3 bluetooth embeded… Also a wifi equivalent would be greater as BT means limited distance.

    28. Februar 2017 at 13:31 #27319

    Thank you for your help.

    My project : be able to listen to music in x3 rooms at least,

    1) from LMS source with synchronized music in each room.
    2) from LMS source with different music, in each room.
    3) From iPhone/Airplay source with synchronized music in each room.
    4) From iPhone/Airplay source with different music, in each room. (multiple iphones)
    5) From Android/??? source with synchronized music in each room.
    6) From Android/??? source with different music, in each room. (multiple iphones)

    Hardware :
    x3 rooms : one RPi + DAC + Speakers in each room (already installed).

    Software :
    Max2Play of course.

    „1)“ & „2)“
    So if I understand correctly your point I’ll have to use one centralized LMS on one RPI, preferably Ethernet 1Gbps connected (wifi isn’t as reliable to say the least).
    Will this centralized LMS fit my requirement „1)“ & „2)“ ?
    -Is an RPi 2 powerfull enough to support a LMS server with a huge library (100k, we are family…) ?
    -Is this very same RPi 2 be powerfull enough to send data to the other 2 in realtime ?

    „3)“ is working but with a problem as it dosen’t mute LMS music

    „4)“ I don’t know if it’s possible.

    „5)“ I’m looking for a software to play from my android phone to the Max2Play device like on an iphone.. any suggestion 8^)

    „6)“ I don’t know if it’s possible.

    27. Februar 2017 at 15:16 #27266

    Thanks,
    Your reply seems indeed logical, but I’d like to be able to choose between synchronized and not, depending on occasions.

    27. Februar 2017 at 14:40 #27264

    You are very welcome.

    Maybe an HCL of DAC would be usefull for the community, starting with the ones compatible with the kernel you use for Max2Play RPi distribution.

    Long live to M2P !!

Viewing 17 posts - 1 through 17 (of 17 total)