gianpaoloracca

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Posted in:
  • 11. September 2018 at 12:15 #37796

    Thanks. I would assume that updating every now and then max2play could keep me up to date.
    I try what you suggest, but I’m rather sure I already did it yesterday.
    Is there a way to avoid losing all my settings? I know I can backup LMS configuration, but what about all the other settings?

    Bye

    11. September 2018 at 10:45 #37789

    #### LOAD AVERAGE ####
    0.17 0.10 0.07 1/144 5950

    #### KERNEL ####
    Linux raspberry 4.1.19-v7+ #858 SMP Tue Mar 15 15:56:00 GMT 2016 armv7l GNU/Linux

    #### LINUX-VERSION ####
    Distributor ID: Debian
    Description: Debian GNU/Linux 7.11 (wheezy)
    Release: 7.11
    Codename: wheezy

    10. September 2018 at 19:23 #37761

    I tried that (btw, by uninstalling the plugin, you mean to put the openHAB plugin on the inactive list and then reboot?).
    I did it, reactivate the plugin, tried to install openHAB clicking the button but nothing changed. Same messages as before. Still no openHAB server active.

    Please let me know if I can try something else.
    My Max2Play installation is quite old, but I updated regularly and so I did today.

    10. September 2018 at 17:11 #37755

    I managed to install those unauthenticated packages via ssh, but now if I click on the Install openHAB button I get this message and nothing changes.

    OpenHAB (version 2) installation started
    Installazione iniziata – questo messaggio si aggiorna ogni 3 secondi per monitorare il processo di installazione. Se l´installazione é completata, questo messaggio sparisce.
    2018-09-10 17:08:05|
    OK
    Reading package lists…
    Building dependency tree…
    Reading state information…
    Reading package lists…
    Building dependency tree…
    Reading state information…
    dirmngr is already the newest version.
    0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded.
    Executing: gpg –ignore-time-conflict –no-options –no-default-keyring –secret-keyring /tmp/tmp.RTovhmudlQ –trustdb-name /etc/apt//trustdb.gpg –keyring /etc/apt/trusted.gpg –primary-keyring /etc/apt/trusted.gpg –recv-key –keyserver keyserver.ubuntu.com EEA14886
    deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
    deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
    Reading package lists…
    Building dependency tree…
    Reading state information…
    Finished – please click here to reload Page to see Changes

    Should I try to reinstall the add On?

    10. September 2018 at 17:03 #37753

    I have a Raspberry Pi3.
    The user I’m referring to is the one on the myopenhab service which is mandatory to connect Alexa with openhab, right?
    I tried again now to install openHAB server on my Raspberry but I got the same message again:

    OpenHAB (version 2) installation started
    Installazione iniziata – questo messaggio si aggiorna ogni 3 secondi per monitorare il processo di installazione. Se l´installazione é completata, questo messaggio sparisce.
    Reading state information…
    Reading package lists…
    Building dependency tree…
    Reading state information…
    The following extra packages will be installed:
    libassuan0 libksba8 libpth20
    The following NEW packages will be installed:
    dirmngr libassuan0 libksba8 libpth20
    0 upgraded, 4 newly installed, 0 to remove and 7 not upgraded.
    Need to get 419 kB of archives.
    After this operation, 975 kB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
    libassuan0 libksba8 libpth20 dirmngr
    Executing: gpg –ignore-time-conflict –no-options –no-default-keyring –secret-keyring /tmp/tmp.BCMu4epUkt –trustdb-name /etc/apt//trustdb.gpg –keyring /etc/apt/trusted.gpg –primary-keyring /etc/apt/trusted.gpg –recv-key –keyserver keyserver.ubuntu.com EEA14886
    deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
    deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main
    Reading package lists…
    Building dependency tree…
    Reading state information…
    Finished – please click here to reload Page to see Changes

    Let me know if and where I can get more info to debug it.

    10. September 2018 at 16:10 #37748

    Hi, I really want to try this, but I can’t install openHab server.
    I installed the add-on, created an openhab user but when I click on the button to install I get this message

    WARNING: The following packages cannot be authenticated!
    libassuan0 libksba8 libpth20 dirmng

    And I think that the installation fails.

    29. Mai 2018 at 7:38 #35944

    Have you tried the cd player LMS plugin? It should let you to attach an usb cd drive to the RPI and play it through LMS. I saw it a while ago, installed it but never tried.

    HTH,

    Gianpaolo

    21. September 2016 at 21:28 #23127

    Ok, maybe I solved it.
    I ran the script again from
    /opt/max2play/update_max2play.sh
    The first time I got an error
    `Copy custom header files
    mkdir: cannot create directory /var/www/max2play/public/addons/squeezeplug': File exists
    Then I copied that directory in another location just for backup and ran the script again.
    The second time the script ended without errors. I rebooted and everything was ok.

    Hope that this helps someone else

    18. September 2015 at 23:18 #15739

    Yes indeed!
    I read something about it but now I can’t find it anymore: can I synchronize two or more audio player while playing AirTunes via shairtunes? Thanks again,

    Gianpaolo

Viewing 9 posts - 1 through 9 (of 9 total)