Stefan121

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • 19. März 2018 at 13:55 #34532

    Hi Heiner,

    thank you for your fast reply!
    I have updated my raspberry pi3 to the latest beta (version 180315) und tried to reinstall the spotify connect plugin. the reinstallation was successful but when I try to start the service I get the following message:

    #### Librespot Output ####
    error: Unrecognized option: 'onstart'
    Usage: /opt/spotifyconnect/librespot [options]
    
    Options:
        -c, --cache CACHE   Path to a directory where files will be cached.
            --disable-audio-cache 
                            Disable caching of the audio data.
        -n, --name NAME     Device name
            --device-type DEVICE_TYPE
                            Displayed device type
        -b, --bitrate BITRATE
                            Bitrate (96, 160 or 320). Defaults to 160
            --onevent PROGRAM
                            Run PROGRAM when playback is about to begin.
        -v, --verbose       Enable verbose output
        -u, --username USERNAME
                            Username to sign in with
        -p, --password PASSWORD
                            Password
            --disable-discovery 
                            Disable discovery mode
            --backend BACKEND
                            Audio backend to use. Use '?' to list options
            --device DEVICE Audio device to use. Use '?' to list options if using
                            portaudio
            --mixer MIXER   Mixer to use
            --initial-volume VOLUME
                            Initial volume in %, once connected (must be from 0 to
                            100)
            --zeroconf-port ZEROCONF_PORT
                            The port the internal server advertised over zeroconf
                            uses.
            --enable-volume-normalisation 
                            Play all tracks at the same volume
            --normalisation-pregain PREGAIN
                            Pregain (dB) applied by volume normalisation
    
     
    
    #### Librespot Command Line Options ####
    error: Required option 'name' missing
    Usage: /opt/spotifyconnect/librespot [options]
    
    Options:
        -c, --cache CACHE   Path to a directory where files will be cached.
            --disable-audio-cache 
                            Disable caching of the audio data.
        -n, --name NAME     Device name
            --device-type DEVICE_TYPE
                            Displayed device type
        -b, --bitrate BITRATE
                            Bitrate (96, 160 or 320). Defaults to 160
            --onevent PROGRAM
                            Run PROGRAM when playback is about to begin.
        -v, --verbose       Enable verbose output
        -u, --username USERNAME
                            Username to sign in with
        -p, --password PASSWORD
                            Password
            --disable-discovery 
                            Disable discovery mode
            --backend BACKEND
                            Audio backend to use. Use '?' to list options
            --device DEVICE Audio device to use. Use '?' to list options if using
                            portaudio
            --mixer MIXER   Mixer to use
            --initial-volume VOLUME
                            Initial volume in %, once connected (must be from 0 to
                            100)
            --zeroconf-port ZEROCONF_PORT
                            The port the internal server advertised over zeroconf
                            uses.
            --enable-volume-normalisation 
                            Play all tracks at the same volume
            --normalisation-pregain PREGAIN
                            Pregain (dB) applied by volume normalisation

    Before the reinstallation I have delete the spotifyconnect-folders in /opt/ and var/www/max2play/applications/plugins and hte librespot.zip-file in /opt/max2play/cache. But the problem ist the same before.

    Do you have any tips for me?

    14. März 2018 at 9:38 #34413

    Hi Heiner,

    I have updated the plugins in the webinterface „Einstellungen / Reboot“ und then the spotifyplugin reinstalled. Now I get another error, when I try to connect with SpotifyConnect:

    #### Librespot Output ####
    INFO:librespot: librespot cc9dba8 (2017-03-26). Built on 2017-07-17. Build ID: 8zQE3Bpb
    INFO:librespot::session: Connecting to AP "gew1-accesspoint-b-zjkl.ap.spotify.com:4070"
    INFO:librespot::session: Authenticated as "USERNAME" !
    INFO:librespot::audio_backend::alsa: Using alsa sink
    INFO:librespot::session: Country: "DE"
    thread 'main' panicked at 'called <code>Result::unwrap()</code> on an <code>Err</code> value: WireError("invalid value for enum: 13")', /checkout/src/libcore/result.rs:859
    note: Run with <code>RUST_BACKTRACE=1</code> for a backtrace.
    
    #### Librespot Command Line Options ####
    error: Required option 'name' missing.
    Usage: /opt/spotifyconnect/librespot [options]
    
    Options:
        -c, --cache CACHE   Path to a directory where files will be cached.
            --disable-audio-cache 
                            Disable caching of the audio data.
        -n, --name NAME     Device name
        -b, --bitrate BITRATE
                            Bitrate (96, 160 or 320). Defaults to 160
            --onstart PROGRAM
                            Run PROGRAM when playback is about to begin.
            --onstop PROGRAM
                            Run PROGRAM when playback has ended.
        -v, --verbose       Enable verbose output
        -u, --username USERNAME
                            Username to sign in with
        -p, --password PASSWORD
                            Password
            --disable-discovery 
                            Disable discovery mode
            --backend BACKEND
                            Audio backend to use. Use '?' to list options
            --device DEVICE Audio device to use. Use '?' to list options
            --mixer MIXER   Mixer to use

    Then the SpotifyConnect service is stopping.

    I have add the IP adress of the device in the option of the plugin.

    Because of these errors I have updated my system withe the commands „apt-get update“ and „apt-get upgrade“ to the newest version of „jessie“. But without success…

    • This reply was modified 6 years ago by Stefan121.
    13. März 2018 at 9:52 #34371

    Hello Heiner,

    I have checked the entries in my „Spotify Plugin“. But there are no commands in the command line options. This field is only blank.
    I have just only in the advanced options of the squeezelite filled out the „kommandozeilen optionen“ with the entry „-C 10“ and activated the checkbox „nutze usb-soundkarte“.

    Stefan

    10. März 2018 at 15:53 #34308

    Hello Heiner,

    I have also problems with the Spotyfy-Connect-Plugin too.
    When I try to start the service in the Spotify-Conncet-Setup I get the following message:

    Versucht zu starten … NICHT Erfolgreich Hier klicken für weitere Informationen

    By clicking the link „Hier klicken für weitere Inforationen“ the following informations will be shown:

    error: Unrecognized option: ‚onstart‘
    Usage: /opt/spotifyconnect/librespot [options]

    Options:
    -c, –cache CACHE Path to a directory where files will be cached.
    –disable-audio-cache
    Disable caching of the audio data.
    -n, –name NAME Device name
    –device-type DEVICE_TYPE
    Displayed device type
    -b, –bitrate BITRATE
    Bitrate (96, 160 or 320). Defaults to 160
    –onevent PROGRAM
    Run PROGRAM when playback is about to begin.
    -v, –verbose Enable verbose output
    -u, –username USERNAME
    Username to sign in with
    -p, –password PASSWORD
    Password
    –disable-discovery
    Disable discovery mode
    –backend BACKEND
    Audio backend to use. Use ‚?‘ to list options
    –device DEVICE Audio device to use. Use ‚?‘ to list options if using
    portaudio
    –mixer MIXER Mixer to use
    –initial-volume VOLUME
    Initial volume in %, once connected (must be from 0 to
    100)
    –zeroconf-port ZEROCONF_PORT
    The port the internal server advertised over zeroconf
    uses.
    –enable-volume-normalisation
    Play all tracks at the same volume
    –normalisation-pregain PREGAIN
    Pregain (dB) applied by volume normalisation

    I have also try to reinstall the service by clicking „Reinstall Spotify Connect Service“ but the problem isn’t solved.

    Please can you help me?

    Thanks very lot!

    Stefan

    8. Februar 2018 at 16:51 #33919

    Hi Heiner,

    is there any (future) possibility to save the credentials encrypted via hash?

    Stefan

    8. Februar 2018 at 15:18 #33916

    Hi Heiner,

    thanks for your answer.
    When I type in my wlan credentials: In which file would these credentials be save? Can I find there my wlan-key in clear text or is the key encrypted via hash?

    Stefan

Viewing 6 posts - 1 through 6 (of 6 total)