jliggio

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Back to forum
    Posted in: Allo USB Bundle
  • jliggio premium
    24. März 2018 at 19:04 #34717

    I neglected to provide the de-bug information for squeezelite. I cannot get any de-bug information for jivelite, and when I tried to re-install jivelite I was unsuccessful. Here they are:
    #### SQUEEZELITE VERSION ####
    Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o default:CARD=ALSA -a 120::16:
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=ALSA
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi

    #### SQUEEZELITE -l ####

    #### SHAIRPORT (SYNC) VERSION ####
    2.8.0-openssl-Avahi-ALSA-soxr

    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed

    #### OUTPUT SOUND DETAILS CARD 1 ####
    closed

    Network:

    Link encap:Ethernet HWaddr b8:27:eb:f7:ee:f7
    inet addr:192.168.1.125 Bcast:192.168.1.255 Mask:255.255.255.0
    inet6 addr: fe80::716d:d162:b1a4:8f56/64 Scope:Link
    inet6 addr: 2600:1702:2f0:4490:c83e:3d0c:f27:599d/64 Scope:Global
    inet6 addr: 2600:1702:2f0:4490::36/128 Scope:Global
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:7066 errors:0 dropped:0 overruns:0 frame:0
    TX packets:503 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:528578 (516.1 KiB) TX bytes:153101 (149.5 KiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:65536 Metric:1
    RX packets:4 errors:0 dropped:0 overruns:0 frame:0
    TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1
    RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)

    wlan0 Link encap:Ethernet HWaddr b8:27:eb:a2:bb:a2
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:1 errors:0 dropped:1 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:60 (60.0 B) TX bytes:0 (0.0 B)

    ### WLAN ###

    Jivelite:

    jliggio premium
    21. Mai 2017 at 21:09 #28973

    Mr. Mbydeen, thank you for your assistance. I figured it out. I noticed also that there were other members of the forum who were seeking assistance with Squeezelite, and who also had „analog audio out“ issues. So let me tell you what I learned:

    I went to the „Audio Player“ Tab. When I could not open Squeezelite, I opened „Edit Advanced Options“ The first thing to edit was the Soundcard to
    „Select Audio Output“ I set it to the IQaudioDAC which is my installed card, and Squeezelite started, and I have audio input again. Please pass this along.

    Thank you Sir, for your kind patience and assistance.

    jliggio premium
    19. Mai 2017 at 17:52 #28957

    Mr. Mbydeen, I thank you for your assistance.

    I did what you suggested sir, but perhaps the error is with Squeeezelite. It isn’t automatically starting, and I couldn’t manually start Squeezelite. Here’s what I’m told when I try to manually start Squeezelite:

    Trying to launch … NOT successful Click here to show detailed information
    [11:50:58.224940] test_open:384 playback open error: No such device
    [11:50:58.225158] output_init_common:382 unable to open output device

    Here’s the debug information:

    #### SQUEEZELITE VERSION ####
    Squeezelite v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o default:CARD=ALSA -a 120::16:
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=ALSA
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi

    #### SQUEEZELITE -l ####
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    equal
    plugequal – Equalizer for plughw:0,0
    default:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
    sysdefault:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
    dmix:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct sample mixing device
    dsnoop:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct sample snooping device
    hw:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct hardware device without any conversions
    plughw:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Hardware device with all software conversions

    #### SHAIRPORT VERSION ####
    2.8.0-openssl-Avahi-ALSA-soxr

    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed

    #### OUTPUT SOUND DETAILS CARD 1 ####

    jliggio premium
    16. Mai 2017 at 13:19 #28873

    Thank you, Sir!

    Yes, I followed the build instructions, and the unit worked well for more than a month. I went out of town, and I unplugged the unit while I was gone. When I returned, the unit wasn’t working, so I re-set it to factory settings, and re-did the software set-up from the beginning.

    All works fine, except no analog audio output (the headphone jack works). Here is the audio debug information:

    #### SQUEEZELITE VERSION ####
    Squeezelite v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o default:CARD=ALSA -a 120::16:
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=ALSA
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi

    #### SQUEEZELITE -l ####
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    equal
    plugequal – Equalizer for plughw:0,0
    default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
    dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
    dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
    dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
    hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
    hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
    plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
    plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions
    default:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
    sysdefault:CARD=IQaudIODAC – IQaudIODAC, – Default Audio Device
    dmix:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct sample mixing device
    dsnoop:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct sample snooping device
    hw:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Direct hardware device without any conversions
    plughw:CARD=IQaudIODAC,DEV=0 – IQaudIODAC, – Hardware device with all software conversions

    #### SHAIRPORT VERSION ####
    2.8.0-openssl-Avahi-ALSA-soxr

    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed

    #### OUTPUT SOUND DETAILS CARD 1 ####
    closed

Viewing 4 posts - 1 through 4 (of 4 total)