No network connection: Pi Zero W & USB-LAN

Max2Play > Topics > No network connection: Pi Zero W & USB-LAN

This topic has 1 reply, 2 voices, and was last updated 6 years, 12 months ago by Heiner premium.

Viewing 2 posts - 1 through 2 (of 2 total)

Back to forum

Posted in: Max2Play on Raspberry PI
simi

16. September 2017 at 20:25 #31354

Hi,
I am trying to use M2P on a Pi Zero W with USB-LAN-adapter (wired – chip: Realtek RTL8152B). Unfortunately a network connection cannot be established. Is the network adapter supported natively or are there any amendments I have to do manually (how?)? I am an absolute Linux noob… 😉

Many thanks 🙂

Heiner premium

18. September 2017 at 13:53 #31370

Hi simi,

Unfortunately, we have not had any experience with this board, yet. However, you can contact the manufacturer and ask whether it is compatible with the RPi Zero W and if so, what drivers have to be installed. In the meantime, you can check out the WiFi options for the Zero W.

We offer both WPS: https://www.max2play.com/en/how-tos/how-to-wifi-configuration-with-wps-and-max2play/

And an Access Point Autostart Mode: https://www.max2play.com/en/2017/08/access-point-autostart-mode/

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.