verstrepeng

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Posted in:
  • 23. März 2016 at 10:34 #19425

    Hi,

    i tried the setup on a RPi 3 now using Jessie bate image.
    Installation and pairing working and i have audio.

    All seems to be working, next step will be multisqueeze.

    Many thanks!

    Geert

    17. März 2016 at 12:00 #19331

    Hi,

    thanks for developing BT support.
    I currently have:
    – pairing working
    – pulse output configured and squeezelite running
    – no audio send to speaker

    Running:
    Version Beta-160301 (installed from jessie image)
    Raspberry PI 2B

    Debug info:
    #### Bluetooth Installation ####

    #### Bluetooth Dongle ####
    hci0: Type: BR/EDR Bus: USB
    BD Address: 00:15:83:E5:C5:34 ACL MTU: 310:10 SCO MTU: 64:8
    UP RUNNING
    RX bytes:5349 acl:33 sco:0 events:583 errors:0
    TX bytes:215649 acl:774 sco:0 commands:50 errors:0

    #### DEVICE XW-BTSP1 ####
    [C8:84:47:28:57:65]
    Name: XW-BTSP1
    Alias: XW-BTSP1 [rw]
    Address: C8:84:47:28:57:65
    Icon: audio-card
    Class: 0x240414
    Paired: 1
    Trusted: 1 [rw]
    Blocked: 0 [rw]
    Connected: 1
    UUIDs: [AudioSink, AVRemoteControlTarget, AdvancedAudioDistribution, AVRemoteControl]

    #### PCACMD LIST | grep active ####
    active port: <analog-output>
    active port: <speaker-output>
    active profile: <output:analog-stereo>
    active profile: <a2dp>

    #### PCACMD LIST | grep sink ####
    Default sink name: bluez_sink.C8_84_47_28_57_65
    Default source name: bluez_sink.C8_84_47_28_57_65.monitor
    module.description = „When a bluetooth sink or source is added, load module-loopback“
    module.description = „Automatically restore the default sink and source“
    module.description = „When a sink/source is removed, try to move its streams to the default sink/source“
    name: <module-always-sink>
    module.description = „Always keeps at least one sink loaded even if it’s a null one“
    module.description = „When a sink/source is idle for too long, suspend it“
    module.description = „Load filter sinks automatically when needed“
    module.description = „BlueZ 5 Bluetooth audio sink and source“
    2 sink(s) available.
    name: <bluez_sink.C8_84_47_28_57_65>
    bluetooth.protocol = „a2dp_sink“
    name: <bluez_sink.C8_84_47_28_57_65.monitor>
    sinks:
    sinks:
    bluez_sink.C8_84_47_28_57_65/#1: XW-BTSP1
    bluez_sink.C8_84_47_28_57_65.monitor/#1: Monitor of XW-BTSP1
    1 sink input(s) available.
    sink: 0 <alsa_output.0.analog-stereo>
    module-stream-restore.id = „sink-input-by-application-name:ALSA plug-in [squeezelite]“

    #### X-SERVER RUNNING ####
    1

    #### SQUEEZELITE VERSION ####
    Squeezelite v1.8, Copyright 2012-2015 Adrian Smith.

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o pulse -a 80:4::
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=ALSA
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi

    #### SQUEEZELITE -l ####
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    pulse – PulseAudio Sound Server
    equal
    plugequal – Equalizer for plughw:0,0
    default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
    dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
    dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
    dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
    hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
    hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
    plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
    plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions

    #### SHAIRPORT VERSION ####
    2.8.0-openssl-Avahi-ALSA-soxr

    #### OUTPUT SOUND DETAILS CARD 0 ####
    access: MMAP_INTERLEAVED
    format: S16_LE
    subformat: STD
    channels: 2
    rate: 44100 (44100/1)
    period_size: 16384
    buffer_size: 16384

    #### OUTPUT SOUND DETAILS CARD 1 ####

Viewing 2 posts - 1 through 2 (of 2 total)