U.Tacke

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • 4. November 2019 at 15:49 #47468

    Ich habe leider nichts mehr auf meine Info vom 17.10. gehört und habe mir jetzt den HifiBerry DAC+ Pro bei max2play bestellt.

    Wer Interesse an ALLO Piano 2.1 und KALI hat und damit weiter experimentieren möchte, bitte eine PM schicken.

    Werde mich gern gegen einen kleinen Obulus davon trennen wollen …

    Ich hoffen, das es dann mit Hifiberry wieder funktionieren wird.

    PS: Schade, Support stelle ich mir bei „Premium“ etwas anders vor. Aber der gute Wille war ja zu erkennen.

    Vielen Dank und Gruß
    Ulrich

    17. Oktober 2019 at 15:49 #47360

    Hallo Herr Heiner,
    vielen Dank für ihre Mühe.

    Ich habe noch etwas nachgeforscht und bin auf diesen Link gestoßen, wo ein Work-Around beschrieben ist:
    http://moodeaudio.org/forum/showthread.php?tid=152

    Auszug aus dem Text:
    „Allo has acknowledged a compatibility issue between Kali and the new 4.14.y Linux kernel. … The workaround is to set SoX resampling to 32 bit / * kHz in MPD config.“

    Auch in diesem Link gibt es wohl den gleichen Work-Around:
    https://audiophilestyle.com/forums/topic/43561-piano-21-kali-raspberry-3b-no-mp3-no-lossless-24-bits-solved/

    „SOLVED:
    edit /etc/mpd.conf:
    audio_output {
    type „alsa“
    name „My ALSA Device“
    # add for mp3 and 24 bit-FLAC:
    format „192000:32:2″
    }

    edit /boot/config.txt:
    dtparam=audio=off
    dtoverlay=allo-piano-dac-plus-pcm512x-audio,glb_mclk

    reboot

    Hier bin ich fachlich leider nicht so tief drin, als das ich dieses nun weiter prüfen könnte.

    Wie ist das denn mit dem eigenen MAx2Play Bundle „RPi3B+ plus Piano2.1 und Kali“, was angeboten wird?
    Da funktioniert noch alles?

    Viele Grüße
    Ulrich

    11. Oktober 2019 at 16:26 #47274

    Vielleicht auch noch wichtig:

    Vor der m2p Image Installation habe ich den folgende Firmware Update für den Allo Piano 2.1 DAC ohne Probleme mit diesen Befehlen durchgeführt:

    wget https://github.com/allocom/piano-firmware/archive/master.zip
    sudo unzip -q master.zip
    sudo rm ./master.zip
    sudo cp -r ./piano-firmware-master/lib/firmware/allo /lib/firmware
    sudo rm -rf ./piano-firmware-master

    Mit freundlichen Grüßen.
    Ulrich Tacke

    11. Oktober 2019 at 16:26 #47275

    Vielleicht auch noch wichtig:

    Vor der m2p Image Installation habe ich den folgende Firmware Update für den Allo Piano 2.1 DAC ohne Probleme mit diesen Befehlen durchgeführt:

    wget https://github.com/allocom/piano-firmware/archive/master.zip
    sudo unzip -q master.zip
    sudo rm ./master.zip
    sudo cp -r ./piano-firmware-master/lib/firmware/allo /lib/firmware
    sudo rm -rf ./piano-firmware-master

    Mit freundlichen Grüßen.
    Ulrich Tacke

    11. Oktober 2019 at 16:20 #47273

    Hallo Herr Heiner,

    vielen Dank für ihre Unterstützung.

    Ich nutze den Raspberry 3B plus und als M2P Image verwende ich die Version

    m2p_stretch_rpi_v249.img mit 3,58 GB.

    Mit freundlichen Grüßen.
    Ulrich Tacke

    9. Oktober 2019 at 22:59 #47258

    HAllo Support,

    anbei der Auszug aus „dmesg“ mit einigen Fehlermeldungen …

    …………
    4.313911] media: Linux media interface: v0.10
    [ 4.368542] snd-allo-piano-dac-plus soc:sound: ASoC: CPU DAI (null) not registered – will retry
    [ 4.368562] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.368622] videodev: Linux video capture interface: v2.00
    [ 4.371278] snd-allo-piano-dac-plus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered – will retry
    [ 4.371298] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.451459] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
    [ 4.452953] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
    [ 4.472190] .
    [ 4.476266] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.2/input2
    [ 4.537687] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
    [ 4.537723] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
    [ 4.550209] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    [ 4.560499] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
    [ 4.560558] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
    [ 4.567922] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
    [ 4.567957] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
    [ 4.574395] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
    [ 4.574436] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
    [ 4.575074] snd-allo-piano-dac-plus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered – will retry
    [ 4.575089] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.613659] snd-allo-piano-dac-plus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered – will retry
    [ 4.613678] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.617203] input: Logitech Unifying Device. Wireless PID:401b Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:401B.0006/input/input4
    [ 4.619335] hid-generic 0003:046D:401B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401b] on usb-3f980000.usb-1.2:1
    [ 4.622954] input: Logitech Unifying Device. Wireless PID:4016 Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:4016.0007/input/input8
    [ 4.624298] snd-allo-piano-dac-plus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered – will retry
    [ 4.624318] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.625000] input: Logitech Unifying Device. Wireless PID:4016 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:4016.0007/input/input9
    [ 4.628211] input: Logitech Unifying Device. Wireless PID:4016 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:4016.0007/input/input10
    [ 4.628824] hid-generic 0003:046D:4016.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-3f980000.usb-1.2:2
    [ 4.629304] snd-allo-piano-dac-plus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered – will retry
    [ 4.629319] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.664341] cfg80211: Loaded X.509 cert ’sforshee: 00b28ddf47aef9cea7′
    [ 4.683567] pcm512x 1-004d: 1-004d supply AVDD not found, using dummy regulator
    [ 4.683653] pcm512x 1-004d: Linked as a consumer to regulator.0
    [ 4.683671] pcm512x 1-004d: 1-004d supply DVDD not found, using dummy regulator
    [ 4.683759] pcm512x 1-004d: 1-004d supply CPVDD not found, using dummy regulator
    [ 4.696376] snd-allo-piano-dac-plus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered – will retry
    [ 4.696404] snd-allo-piano-dac-plus soc:sound: snd_soc_register_card() failed: -517
    [ 4.696847] pcm512x 1-004c: 1-004c supply AVDD not found, using dummy regulator
    [ 4.696972] pcm512x 1-004c: Linked as a consumer to regulator.0
    [ 4.696989] pcm512x 1-004c: 1-004c supply DVDD not found, using dummy regulator
    [ 4.697051] pcm512x 1-004c: 1-004c supply CPVDD not found, using dummy regulator
    [ 4.730271] snd-allo-piano-dac-plus soc:sound: control 2:0:0:Digital Playback Volume:0 is already present
    [ 4.730290] pcm512x 1-004d: ASoC: Failed to add Digital Playback Volume: -16
    [ 4.738085] snd-allo-piano-dac-plus soc:sound: multicodec <-> 3f203000.i2s mapping ok
    [ 4.790863] brcmfmac: F1 signature read @0x18000000=0x15264345
    [ 4.802319] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
    [ 4.803261] usbcore: registered new interface driver brcmfmac
    [ 4.976977] input: Logitech M215 2nd Gen as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:401B.0006/input/input14
    [ 4.977619] logitech-hidpp-device 0003:046D:401B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-3f980000.usb-1.2:1
    [ 5.013020] random: crng init done
    [ 5.013034] random: 7 urandom warning(s) missed due to ratelimiting
    [ 5.046737] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
    [ 5.068942] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
    [ 5.200234] brcmfmac: power management disabled
    [ 5.456299] input: Logitech K330 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:4016.0007/input/input15
    [ 5.461036] logitech-hidpp-device 0003:046D:4016.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K330] on usb-3f980000.usb-1.2:2
    [ 5.512032] .
    [ 5.701623] uart-pl011 3f201000.serial: no DMA platform data
    [ 6.552062] .
    [ 6.669189] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
    [ 7.579717] input: lircd-uinput as /devices/virtual/input/input16
    [ 7.592003] …ready
    [ 9.672653] sd 0:0:0:0: [sda] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
    [ 9.672962] sd 0:0:0:0: [sda] Write Protect is off
    [ 9.672968] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08
    [ 9.675148] sd 0:0:0:0: [sda] No Caching mode page found
    [ 9.675156] sd 0:0:0:0: [sda] Assuming drive cache: write through

    Hoffe, das es etwas hilft das Problem zu lösen.
    Mit freundlichen Grüßen. U.Tacke

Viewing 6 posts - 1 through 6 (of 6 total)