Spaetzle

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • 12. Oktober 2016 at 16:53 #23404

    Hi Christoph
    OK. It is doing a little more. I can not see an more errors. But there is no sound.
    Is there a trick if I want to use the optical output. The PI is connected to the sound system with the optical output as I have no coax input at the sound system …
    And as it seems I can not use the volume control of mpd. The controller with the client software I am using (gmpc) is unavailable.

    • This reply was modified 7 years, 5 months ago by Spaetzle.
    11. Oktober 2016 at 11:48 #23373

    Yes I did reboot the Raspi.

    As I tryed out many things I started again today:

      Downloaded m2p_rpi3_hifiberry_235_wps.img.zip, unpacked and put it on the SD Card
      started the PI
      Settings / Reboot – Expand Filesystem
      Reboot
      Settings / Reboot: Entered License Code, Changed Language to german
      Reboot

    Remark: Everything is in english althougt the interface shows that german is selected.

      Menu „HifiBerry“ – Selected Digi/Digi+.
      Reboot
      Selected: „Starter: A simple audioplayer for internet radio and local music (mp3)“ – Select this setup
      Reboot
      mounted a nfs share with music and changed set up of mpd to the mounted folder

    Now I opend a ssh connection to the PI and looked into /var/log/mpd/mpd.log. After stoping and restarting mpd with the webinterface I get the following output:

    Oct 11 11:44 : client: [0] closed
    Oct 11 11:44 : zeroconf: No global port, disabling zeroconf
    Oct 11 11:44 : client: [0] opened from 127.0.0.1:43272
    Oct 11 11:44 : alsa_mixer: Failed to read mixer for 'Max2Play ALSA Device': no such mixer control: Digital
    

    aplay -l shows:

    **** Liste der Hardware-Geräte (PLAYBACK) ****
    Karte 0: ALSA [bcm2835 ALSA], Gerät 0: bcm2835 ALSA [bcm2835 ALSA]
      Sub-Geräte: 8/8
      Sub-Gerät #0: subdevice #0
      Sub-Gerät #1: subdevice #1
      Sub-Gerät #2: subdevice #2
      Sub-Gerät #3: subdevice #3
      Sub-Gerät #4: subdevice #4
      Sub-Gerät #5: subdevice #5
      Sub-Gerät #6: subdevice #6
      Sub-Gerät #7: subdevice #7
    Karte 0: ALSA [bcm2835 ALSA], Gerät 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
      Sub-Geräte: 1/1
      Sub-Gerät #0: subdevice #0
    Karte 1: sndrpihifiberry [snd_rpi_hifiberry_digi], Gerät 0: HifiBerry Digi HiFi wm8804-spdif-0 []
      Sub-Geräte: 1/1
      Sub-Gerät #0: subdevice #0
    

    The settings for MPD „Music Player Soundcard Settings“ in the Webinterface are:
    Sound device: equal – equal
    Audio Format: 192000:24:2
    Mixer Device: hw:1
    Mixer Controler: Digital

    Any ideas what’s going wrong here?

    Regards
    Bernd

Viewing 2 posts - 1 through 2 (of 2 total)