Sigis

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Posted in:
  • 11. Juni 2016 at 20:40 #20660

    Hello, Heiner,
    have issue on pairing Bluetooth speakers.
    I’m using 7“ Touch Display, Raspberry Pi 3, Power Supply, Case, Soundcard, MicroSD Card with Max2Play, Assembly Kit
    Bluetooth speaker is visible on bluetooth plugin interface but it is in the red color and not paired..

    Do you have idea how to fix?
    ______________________________________________

    #### Bluetooth Installation ####
    #### Bluetooth Dongle ####
    hci0: Type: BR/EDR Bus: UART
    BD Address: B8:27:EB:B3:7C:18 ACL MTU: 1021:8 SCO MTU: 64:1
    UP RUNNING PSCAN
    RX bytes:807 acl:0 sco:0 events:52 errors:0
    TX bytes:2085 acl:0 sco:0 commands:50 errors:0
    #### DEVICE AEG BSS 4804 ####
    [45:11:67:00:00:4B]
    Name: AEG BSS 4804
    Alias: AEG BSS 4804 [rw]
    Address: 45:11:67:00:00:4B
    Icon: audio-card
    Class: 0x240404
    Paired: 0
    Trusted: 1 [rw]
    Blocked: 0 [rw]
    Connected: 0
    UUIDs: []

    #### PACMD LIST | grep active ####
    active port: <analog-output>
    active profile: <output:analog-stereo>

    #### PACMD LIST | grep sink ####
    Default sink name: alsa_output.platform-sound.analog-stereo
    module.description = „When a bluetooth sink or source is added, load module-loopback“
    module.description = „Automatically restore the default sink and source“
    module.description = „When a sink/source is removed, try to move its streams to the default sink/source“
    name: <module-always-sink>
    module.description = „Always keeps at least one sink loaded even if it’s a null one“
    module.description = „When a sink/source is idle for too long, suspend it“
    module.description = „Load filter sinks automatically when needed“
    1 sink(s) available.
    sinks:
    1 sink input(s) available.
    sink: 0 <alsa_output.platform-sound.analog-stereo>
    module-stream-restore.id = „sink-input-by-application-name:ALSA plug-in [squeezelite]“

    #### X-SERVER RUNNING ####
    1
    #### PULSEAUDIO RUNNING ####
    1 S 1000 913 1 2 80 0 – 23641 – ? 00:00:06 pulseaudio

    28. Mai 2016 at 19:19 #20395

    I have issue with wifi connection. I’m trying to set wlan, sometime IP appears, but after rebooting trying to have wifi connection the same problem. Have to plug LAN again..

    Tab:
    WiFi & Network configuration
    No networks found
    Status: WiFi USB adapter status is active. WiFi connection status is active (IP: NO IP! No connection!)
    (Only WPA/WPA2-Encryption possible)

    Do you have idea how stabilise RPI3?

Viewing 2 posts - 1 through 2 (of 2 total)