nils.th

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Back to forum
    Posted in: Allo USB Bundle
  • nils.th premium
    30. November 2017 at 16:33 #32720

    Hey again,

    it seams tu run now:

    pi2 => reset configuration to defaults and activated WPS on next boot – worked
    pi3 => startet again with fresh sd-card, as reset to defaults didin’t work. Activated WPS on first boot – worked

    My recommendation: use only WPS for the wifi setup! Do not follow the steps described on the download page. Do not manually fill in network und key via webinterface. Maybe that should be changed on the website.

    I am really like the idea of max2play and i hope that the next steps towards multiroom-system won’t be that tricky…

    regrads
    Nils

    nils.th premium
    30. November 2017 at 0:08 #32713

    Hi there, I still have the problem with missing internet connection on wifi and I did not find a solution in this forum. I have a Pi3 and a Pi2 with USB wifi, both with freshly installed m2p, that behave as follows:
    – pi3: internet connection avaiable, but IP adress (ifconfig) remains on 192.168.189.1. Accesspoint Mode is disabled
    – pi2: not internet connection avaiable, i disabled Accesspoint Mode but after reboot the pi falls back into Accesspoint Mode

    I tried to change the nameserver in /etc/resovle.conf to my router what gives me an internet connection untill reboot. After reboot, my changes to resolve.conf are overwritten to the defaults…

    Updating kernel an packages also doesn’t help.

    It’s feels annoying that even the first basic step – establishing the wifi connection – seems to be buggy….
    can you help me? whta do you need to help?

    Thx
    Nils

Viewing 2 posts - 1 through 2 (of 2 total)