Mavi

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Posted in:
  • 1. Juni 2020 at 14:34 #48900

    Hi all, sorry for the double posts. not handy.

    I have been using the max2play software with great joy over the past years.

    Same story here. and busy with it for the last days.
    After fiddling with network folders the system became unresponsive and i decided to burn a new image from scratch.
    I forgot i was in this situation before.
    Since then i am unable to activate my license on a fresh copy of max2play.
    Also the starting page does not respond to download the hifiberry tar file. nothing happens when clicking the button.
    the interface is giving me information about „no network available“ or write protected card.
    I can write to the card from windows so that’s not the problem either i guess.
    the weird thing is that i can not download packages for hifiberry card but downloading the nightly squeezebox server is no problem. Also the information in the health checker box is telling me that internet is connected.
    in the debug there is no information on the soundcard. is this normal? or maybe it’s broken.

    Maybe i created some sort of short circuit while plugging in and out? i never bothered to buy a casing. oops..
    therefore itried volumio. to check if it is a hardware or software problem. With volumio network and hifiberry dac al works. so that is hopefull. Volumio looks nice and seems easy to setup but doesn’t cut it for me in features.

    Hope you can help me to enjoy max2play in the future.
    unfortunately i dont have a spare raspberry pi lying around to test with. but as a last resort i will but a new one.

    regards,

    Maarten

    debug information of audioplayer
    #### SQUEEZELITE VERSION ####
    Squeezelite Max2Play v1.0.2 based on v1.8.4-726, Copyright 2012-2015 Adrian Smith, 2015-2016 Ralph Irving.

    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o sysdefault:CARD=ALSA -a 80::: -C 5
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d sysdefault:CARD=ALSA
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi
    YMPD_PARAMETER=–webport 8081

    #### SQUEEZELITE -l ####
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    equal
    plugequal – Equalizer for plughw:0,0
    default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    dmix:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample mixing device
    dmix:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample mixing device
    dsnoop:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct sample snooping device
    dsnoop:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct sample snooping device
    hw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Direct hardware device without any conversions
    hw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Direct hardware device without any conversions
    plughw:CARD=ALSA,DEV=0 – bcm2835 ALSA, bcm2835 ALSA – Hardware device with all software conversions
    plughw:CARD=ALSA,DEV=1 – bcm2835 ALSA, bcm2835 IEC958/HDMI – Hardware device with all software conversions

    #### SHAIRPORT (SYNC) VERSION ####
    3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed

    #### OUTPUT SOUND DETAILS CARD 1 ####

    debug information of settings

    #### FILESYSTEM ####
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/root 30511408 2179212 27063952 8% /
    devtmpfs 443724 0 443724 0% /dev
    tmpfs 448332 0 448332 0% /dev/shm
    tmpfs 448332 13544 434788 4% /run
    tmpfs 5120 4 5116 1% /run/lock
    tmpfs 448332 0 448332 0% /sys/fs/cgroup
    /dev/mmcblk0p1 42136 22534 19603 54% /boot
    /dev/sda1 60063724 32132256 27931468 54% /media/usb0
    tmpfs 89664 8 89656 1% /run/user/1000

    #### LOAD AVERAGE ####
    0.05 0.03 0.00 1/206 7893

    #### KERNEL ####
    Linux max2play 4.14.76-v7+ #1150 SMP Mon Oct 15 15:19:23 BST 2018 armv7l GNU/Linux

    #### LINUX-VERSION ####
    Distributor ID: Raspbian
    Description: Raspbian GNU/Linux 9.4 (stretch)
    Release: 9.4
    Codename: stretch

    debug info of network

    eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
    ether b8:27:eb:50:2b:61 txqueuelen 1000 (Ethernet)
    RX packets 0 bytes 0 (0.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 0 bytes 0 (0.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
    inet 127.0.0.1 netmask 255.0.0.0
    loop txqueuelen 1000 (Local Loopback)
    RX packets 9 bytes 429 (429.0 B)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 9 bytes 429 (429.0 B)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.178.14 netmask 255.255.255.0 broadcast 192.168.178.255
    ether b8:27:eb:05:7e:34 txqueuelen 1000 (Ethernet)
    RX packets 5218 bytes 663413 (647.8 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 962 bytes 319044 (311.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

    ### WLAN ###
    wlan0 IEEE 802.11 ESSID:“XXXXXXX“
    Mode:Managed Frequency:5.2 GHz Access Point: 18:35:D1:2F:26:AF
    Bit Rate=433.3 Mb/s Tx-Power=31 dBm
    Retry short limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=65/70 Signal level=-45 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    10. Juli 2018 at 11:59 #36503

    Hello Sorg,

    Thanks for the display guide.
    i was looking for jivelite-wav.zip but the file is not in the web directory anymore.
    ( the original link was http://pughx2.com/assets/px2/files/jivelite-wav.zip)

    Is there a posibillity to get the file through this forum? google did not give any other result then the original link.
    Maybe you or someone on the forum still has the file. I don’t know if there any copyrights on it?

    Through this forum i have managed to get a cheap 3.5 display working under max2play and i like to have the 480×320 skin for it.

    thanks guys.

    • This reply was modified 4 years, 5 months ago by  Mavi.
    • This reply was modified 4 years, 5 months ago by  Mavi.
Viewing 2 posts - 1 through 2 (of 2 total)