kingswindsor

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Posted in:
  • 4. Oktober 2018 at 12:50 #38386

    Could I clarify how the volume control works please?
    Does the volume slider („Settings for DSP-Volume (Sigma TCP-Server ALSA control)“) act on the same parameter as when adjusting volume through the LMS interface?
    If they both act on the same parameter then I suppose I can forget about the Max2Play volume slider and just control volume through the LMS interface – true?
    many thanks – it’s sound good.

    30. September 2018 at 18:08 #38249

    I’ve been experimenting further and the cx100-v1.xml profile allows volume control through LMS and the ALSA slider also works. It sounds very good.

    18. September 2018 at 10:44 #37886

    Heiner
    Do you think either the cx100.xml or the cx100-v1.xml profile will allow volume control? That’s the main problem at the moment.

    I’m assuming that I am changing profiles. Because the display goes back to the basic-full range.xml profile it’s difficult to be sure.
    George

    17. September 2018 at 11:47 #37871

    Heiner
    Thanks for the reply. I’m happy to help test to mature the integration.
    I’m using a Pi3B+ and Max2Play v2.47
    I’ve chosen the CX100-v1.xml profile, set the ALSA volume to about 50% (it was showing zero) and rebooted.
    Just an observation – when I select the CX100-v1.xml profile, it doesn’t seem to stick – it seems to go back to the basic-full range.xml.

    The debug information is here:

    #### SQUEEZELITE VERSION ####
    Squeezelite Max2Play v1.0.3 based on v1.8.7-999, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving.

    #### SQUEEZELITE BUILDOPTIONS ####
    Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR GPIO DSD CONTROLSBS ALSASYNC BLUETOOTHSYNC

    #### AUDIOPLAYER CONFIG ####
    ### Configuration of Audioplayers
    SQUEEZELITE_PARAMETER=-o sysdefault:CARD=sndrpihifiberry -a 80:4:: -o hw:0 -V DSPVolume -C 5
    SQUEEZESLAVE_PARAMETER=-n plugequal
    SHAIRPORT_PARAMETER=-d default:CARD=sndrpihifiberry -t hardware -m hw:0 -c DSPVolume
    USE_USB_DAC=0
    USE_EQUALIZER=0
    SYSTEM_USER=pi
    YMPD_PARAMETER=–webport 8081
    BLUEALSA_PLAY_AUDIOCARD=hw:0,0
    BLUEALSA_PLAY_MIXER=Digital
    LMSIP=192.168.1.218

    #### SQUEEZELITE -l ####
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    equal
    plugequal – Equalizer for plughw:0,0
    bluetooth – Your Bluetooth device A4:9A:58:C8:25:99
    default:CARD=sndrpihifiberry – snd_rpi_hifiberry_dac, – Default Audio Device
    sysdefault:CARD=sndrpihifiberry – snd_rpi_hifiberry_dac, – Default Audio Device
    dmix:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Direct sample mixing device
    dsnoop:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Direct sample snooping device
    hw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Direct hardware device without any conversions
    plughw:CARD=sndrpihifiberry,DEV=0 – snd_rpi_hifiberry_dac, – Hardware device with all software conversions

    #### SHAIRPORT (SYNC) VERSION ####
    3.1.1-OpenSSL-Avahi-ALSA-soxr-sysconfdir:/usr/local/etc

    #### OUTPUT SOUND DETAILS CARD 0 ####
    closed

    #### OUTPUT SOUND DETAILS CARD 1 ####

Viewing 4 posts - 1 through 4 (of 4 total)