bombadil79

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • 20. Oktober 2016 at 21:53 #23491

    Hello,

    thank you for your help so far.

    1. I used the HifiBerry – Image
    2. No additional devices, just the raspi, wifi-connected
    3. Power supply is Rydges SpeedPower High-Quality supply 5V 2,5A
    4. Luckily the problem did not occure since the last 5 or 6 days. No I´m running the Squeezebox server on another raspi cable attached to my network.
    I did not install the Squeezebox server on the faulty raspi with the hifiberry.
    5. No command line options set.

    Maybe the sound remains stable (hope so). Troubleshooting remains difficult but I don´t think it is a problem of unreliable hardware.

    Thomas

    13. Oktober 2016 at 21:14 #23411

    Hello,

    i reinstalled the hole image and updated to 2.37. At the beginning thevsound was just right. I don’t know what happened, but it started to distort again. I shut the system down, rebooted and tested with the raspi attached to my stereo -> good sound. I was happy and thought my active speakers are to be accused. But as I changed back to the speakers the sound was good, too. The raspi was not shut down meanwhile.
    I’m really confused. Some time it works and some time it doesn’t.

    Thomas

    22. September 2016 at 13:28 #23153

    I use the image from the max2play homepage upgraded to the last version 2.36.
    The soundcard is chosen and the system was rebootet.

    Best regards
    Thomas

    22. September 2016 at 12:22 #23139

    Hello,

    no, no changes in this section.

Viewing 4 posts - 1 through 4 (of 4 total)