[SOLVED] What to do at the Pi@Max2play ~ $ Prompt

Max2Play Home Forums Max2Play Add-ons [SOLVED] What to do at the Pi@Max2play ~ $ Prompt

Viewing 2 posts - 1 through 2 (of 2 total)
  • 11. Dezember 2016 at 23:01 #24747

    Hi. I tried installing an image from the Hifiberry site — I selected RP3, Max2Play and the right Dac. I entered pi/raspberry as userid/pw, then got the prompt I pasted in the subject line. I was expecting to boot into a Web interface — where do I go from here? Or is this an indication that something’s wrong with the sd card or the Pi itself? Thanks in advance.

    13. Dezember 2016 at 14:31 #24823

    Dear Che422,

    After burn the image onto a sd-card you only have to stick the sd-card into the Raspberry Pi. This Raspberry Pi have to be connected with your home-network

    Then you wait a few seconds and enter in a browser of your choice – max2play/ . Now you should see the webinterface of max2play.

    Maybe this is a good help for you to start with Max2Play

    Videos

    Take this starter guide, too.

    Starter Guide

    Best Regards
    Christoph

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here