RPI DAC with display, IR and encoder support

Max2Play > Topics > RPI DAC with display, IR and encoder support

This topic has 1 reply, 2 voices, and was last updated 6 years, 10 months ago by Heiner premium.

Viewing 2 posts - 1 through 2 (of 2 total)

Back to forum

Posted in: General Questions on Hardware and Max2Play Versions
phanter

4. Juni 2017 at 20:05 #29229

Hey,

I’m looking for a Raspberry Pi DAC with display, (small OLED, Paper, or similar – for feedback), IR(control without a smartphone) and encoder(control the volume) support.
Is there a plug and play solution? The Iqaudio looks good for me, but i don’t know if there is enough pins to connect a display, IR and encoder..

Do you know a better board? Or is it possible to this with the Iqaudio board? Is there a supported small display? I dont want to use the 5″ with touch, it is just over sized.

Thanks in advance!

Heiner premium

6. Juni 2017 at 14:43 #29289

Hi phanter,
We currently only offer the small OLED by Audiophonics as a small display with sound card option which has a On/Off-Button: https://shop.max2play.com/en/audiophonics-oled-raspberry-pi-display-bundle.html
You could also connect additional periphery on that.
Here is an overview of all our Display bundles: https://shop.max2play.com/en/bundles/by-type/display-bundles.html

With the 7″, you have the advantage of a free GPIO HAT slot for any sound card, allowing you to use IQaudIO or JustBoom which both offer rotary encoder and IR remote support:

Easy control with Rotary Encoder and IR Remote

Rotary Encoder for IQaudIO soundcard now also in Max2Play shop available

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.