Printserver not working with HP Laserjet P1006

Max2Play Home › Forums › Max2Play Add-ons › Printserver not working with HP Laserjet P1006

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Back to forum
    Posted in: Max2Play Add-ons
  • schdrubbi premium
    28. Oktober 2019 at 14:03 #47441

    I’m using a raspberry pi 3 with max2play 2.51.
    Completely new installed without additional HW.
    CUPS plugin is installed w/o errors.
    Webinterface can be accessed.
    With HP P1006 connected and switched on, printer is visible and driver is installed w/o errors.
    But no test page is printed.
    Tried out 3 different (available) drivers with 3 different options each.
    Only with first (recommended) driver a test page is send w/o error, but not printed.
    The other 2 drivers report and error when test page is send to printer.
    Printer is OK and also the used cable. Both work perfectly wehn connected directly to a windows PC.
    Could anyone give me a hint, how to get it working?

    • This topic was modified 4 years, 10 months ago by schdrubbi.
    Heiner premium
    20. November 2019 at 14:51 #47566

    Hi schdrubbi,

    Sorry about the late reply.

    Please have a look at this topic and see if you can rule this problem for your case.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here