Max2Play Home 2016 (en) › Forums › General Questions on Hardware and Max2Play Versions › infrared remote with Hifiberry
I have bought a IR Sensor with remote. It´s plugged at the gpio pin 25 from the hifiberry amp 2+
How I could control the audioplayer with the remote control. The IR codes are checked with an arduino.
Where I could change the Code mappings.
Best weekendwishes 🙂
This HowTo might help you setting up the IR remote: https://www.max2play.com/en/set-up-justboom-ir-remote/
You must be logged in to reply to this topic.
Max2Play free downloadDownload now