Max2Play Home › Forums › General Questions on Hardware and Max2Play Versions › Multiroom player, using 3.5mm audio output › Reply To: Multiroom player, using 3.5mm audio output
Hi Alex,
If you are looking for instructions on how to set up a multiroom audio system with Max2Play, this series of articles might help you: https://www.max2play.com/en/2019/01/step-by-step-multiroom-audio-setup-with-max2play/
The basics are as follows: You need a device on which the Squeezebox server runs (you should already have that). Then you need a Raspberry Pi (with a sound card if necessary) for each room or for each pair of speakers or for each audio output device in general. A Squeezelite player should run on each of these Raspberry Pis. Then all players must be connected to the server (if only one server is running in the network, all players should be connected automatically). Now you can control or synchronize the players individually via the server.