Reply To: Bluetooth and OpenHab notifications doesn't play any sound

18. Dezember 2018 at 20:09 #42832

Hi Heiner,
I reinstalled the Bluetooth plugin and now it is not even starting.

Thanks.

Please see the error below:

#### Bluetooth Installation ####

#### Bluetooth Dongle ####
hci1: Type: Primary Bus: UART
BD Address: B8:27:EB:92:68:C6 ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:743 acl:0 sco:0 events:44 errors:0
TX bytes:1029 acl:0 sco:0 commands:44 errors:0

hci0: Type: Primary Bus: USB
BD Address: 00:02:72:B0:00:26 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING
RX bytes:1014 acl:0 sco:0 events:45 errors:0
TX bytes:937 acl:0 sco:0 commands:45 errors:0

#### BLUEALSA ERROR ####
● bluealsa.service – Start Bluealsa for Bluetooth on Alsa (not compatible with Pulseaudio)
Loaded: loaded (/etc/systemd/system/bluealsa.service; enabled; vendor preset: enabled)
Active: activating (start-pre) since Tue 2018-12-18 18:06:02 GMT; 50ms ago
Process: 2570 ExecStart=/usr/bin/bluealsa -p a2dp-sink -p a2dp-source (code=exited, status=127)
Main PID: 2570 (code=exited, status=127); Control PID: 2839 (sleep)
CGroup: /system.slice/bluealsa.service
└─control
└─2839 /bin/sleep 2

Dec 18 18:06:02 soundsystem systemd[1]: Starting Start Bluealsa for Bluetooth on Alsa (not compatible with Pulseaudio)…

#### BLUEALSA RUNNING ####
0

#### BLUETOOTH SQUEEZEBOX SERVER AUTOSTART ####
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 lines of /var/log/daemon.log
Logfile was modified.
Reading last 10 l