Max2Play Home › Forums › SD-Card Imaging and getting started › [SOLVED] problem getting anything to work, just paid for licence as well › Reply To: [SOLVED] problem getting anything to work, just paid for licence as well
Dear Builder Bad,
For the old Raspberry Pi B+ you need our Max2Play Wheezy Image. You can find it in the download section of the website beneath the standard image which you have taken. It is m2p_default_226_wps.img.
After you download it, you only need to take win32diskimager and burn it onto the sd-card. You don’t need to use diskpart. This will be done through the win32diskimager 🙂
This starter guide is maybe a help: https://www.max2play.com/en/wiki/starter-guide/
1st: Expand the filesystem (without any devices attached at the raspberry pi)
2nd: Update M2P and enter your Max2Play-Premium license
3rd: Install the Squeezebox Server with the Version: Nightly 7.9 . It is the recommended version of Squeezebox Server. It could take a while. After the installation is finished you can see a blue button to open the Squeezebox webadministration.
Now it should run without problems.
Best Regards
Christoph