I found this recipe for setting up access point. I have not tried this myself. You could try if you wish.
Use the RT8188CUS dongle. I would recommend installing the minimum addons (not accesspoint of course), then running this.
Then test if the accesspoint is working.
1 you see the ssid
2 you can connect to the ssid
3 you can get access to the m2p webpage on the PI
wget "http://raspberry-at-home.com/files/ap_setup.sh" chmod +x ap_setup.sh sudo ./ap_setup.sh
The reference web site is:
- This reply was modified 5 years, 9 months ago by noop.