Assembly instruction Case for IQaudIO DAC+ / DigiAMP+ / Digi+ (matt black)

We will show you how to assemble the case for the Raspberry Pi 2 & 3 and IQaudIO DAC+, IQaudIO Digi+ & IQaudIO DigiAMP+ cards. It is a matt black case and you can buy it in our shop.

Step 1

Unpack the components and remove the protection film on them. They are sticking only on one side of the individual plates of the case. Check if all components are there, you can cross-reference them with the picture on the right.

Step 2

Screw the spacers onto the Raspberry Pi, IQaudIO sound card and the baseplate. Now place the Raspberry Pi and the IQaudIO sound card onto the pins of the baseplate and mount it with the remaining spacers (see right picture). Now you can screw the bundle onto the baseplate of the case (see right picture).

Step 3

 

Now you only add the sideplates and screw the roof plate. In the last step you only twist on the bigger screws. This is how the case looks when its fully assembled

Interested in more

You will find more assembly instructions here:

Max2Play How-To