Power Supply Overview

Here you will find an overview of suitable power supplies for the Raspberry Pi 2, 3 or 4B and corresponding sound cards (Dac, Digi, Amp). You can purchase all of the power supplies listed here in our shop.

Most of the time, only the AMP sound cards need their own power supply, while the DACs and DIGIs are powered by the Raspberry Pi.

AMP Power Supplies

12V / 6A – Power Supply

Suitable for these sound cards:  HiFiBerry Amp2, JustBoom AMP and JustBoom AMP HAT

  • Output: 12 V / 6A

19V / 3.15A – Netzteil

Suitable for these sound cards:  HiFiBerry Amp2, IQaudIO Pi-DigiAmp+, JustBoom AMP and JustBoom AMP HAT

  • Output: 19 V / 3.15A

19V / 3.42A – Netzteil

Suitable for these sound cards:  IQaudIO Pi-DigiAmp+

  • Output: 19 V / 3.42A

DAC and DIGI Power Supplies

Default

5V / 3A – Allo Power Supply

  • Output: 5V / 3A
  • DC barrel/Micro-USB/USB-C

Use: Raspberry Pi 3/4 and sound card via microUSB/UBS-C connection of the Pi

7.5V / 2.93A – Power Supply

  • Output: 7.5V / 2.93A
  • DC barrel

Use: Raspberry Pi and Audiophonics sound card via connection of the sound card or the power management module (also suitable for our touch streamer bundle)

Advanced

5V / 2.5A – iFi Audio iPower

  • Output: 5V / 2.5A
  • 4 interchangeable power adapters (UK/US/EU/AUS)
  • various barrel connectors, Micro-USB and USB-C adapter

Audiophile switching power supply with Active Noise Cancellation+ (ANC). It reduces clutter and low-floor noise to a minimum.
Use: Raspberry Pi 3/4 and sound card via microUSB/UBS-C connection of the Pi

5V / 2.85A – Allo NIRVANA

  • Output: 5V / 2.85A
  • DC barrel, USB-A, Micro-USB and USB-C Adapter

The Allo NIRVANA is an ultra-low-noise power supply for the highest audiophile demands.
Use: Raspberry Pi 3/4 and sound card via microUSB/UBS-C connection of the Pi (also suitable for operating a USB sound card like the Allo Revolution DAC)

High-end 

5V / 3A – iFi Audio iPower X

  • Output: 5V / 3A
  • various barrel connectors, Micro-USB and USB-C adapter

Ultra-low noise power supply with improved noise cancellation technology.
Use: Power supply from Raspberry Pi 3/4 and sound card via microUSB/UBS-C connection of the Pi (also suitable for operating a USB sound card like the Allo Revolution DAC)

5.2V 3A / 5.2V 1A – Allo SHANTI

  • Two outputs (galvanically isolated): 5.2V / 3A; 5.2V / 1.2A
  • various barrel connectors , Micro-USB and USB-C adapter

Linear power supply with extremely low differential and common mode noise and very low impedance.
Use: (Separate) power supply of Raspberry Pi 3/4 and sound card via connections of the Pi and/or the sound card (also suitable for operating the Allo DigiOne Signature)

0 Comments

Leave a reply

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

*