Reply To: Problem with 7" screen

6. September 2016 at 15:21 #22885

i try this : in config.txt but its doesnt works

# set current over USB to 1.2A
max_usb_current=1

# overscan to adjust image position
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0

# HDMI config
hdmi_drive=1
hdmi_ignore_edid=0xa5000080
hdmi_group=2
hdmi_mode=87

# 1024x600 display
hdmi_cvt=1024 600 60 3 0 0 0

when i plug my display on another raspberry with KODI its doesnt works too but if i plug the display on my HDMI computer i see the screen.

I think my diplay is not compatible with raspberry or it needs specific parameter