Forum Replies Created
-
Posted in: Allo USB Bundle
-
9. August 2017 at 22:19 #30530
Hi Heiner
Just a quick update for you …
– Beta-Update Max2Play under Settings/Reboot
Done– Do a Kernel Upgrade in the Raspberry Settings menu (button at the bottom of the page)
Kernel Update started Installation started - This Messages refreshes every 3 seconds to show current installation status. When finished this message disappears. 2017-08-09 21:38:56| *** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom *** Performing self-update *** Relaunching after update *** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom ############################################################# This update bumps to rpi-4.9.y linux tree Be aware there could be compatibility issues with some drivers Discussion here: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=167934 ############################################################## *** Downloading specific firmware revision (this will take a few minutes) % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 168 0 168 0 0 194 0 --:--:-- --:--:-- --:--:-- 194 0 54.0M 0 13058 0 0 8043 0 1:57:27 0:00:01 1:57:26 8043 2 54.0M 2 1188k 0 0 438k 0 0:02:06 0:00:02 0:02:04 1084k 10 54.0M 10 5602k 0 0 1550k 0 0:00:35 0:00:03 0:00:32 2810k 17 54.0M 17 9646k 0 0 2089k 0 0:00:26 0:00:04 0:00:22 3218k 23 54.0M 23 12.7M 0 0 2304k 0 0:00:24 0:00:05 0:00:19 3232k 29 54.0M 29 16.0M 0 0 2490k 0 0:00:22 0:00:06 0:00:16 3297k 36 54.0M 36 19.5M 0 0 2623k 0 0:00:21 0:00:07 0:00:14 3828k 42 54.0M 42 23.2M 0 0 2746k 0 0:00:20 0:00:08 0:00:12 3603k 48 54.0M 48 26.3M 0 0 2809k 0 0:00:19 0:00:09 0:00:10 3473k 54 54.0M 54 29.4M 0 0 2841k 0 0:00:19 0:00:10 0:00:09 3451k 60 54.0M 60 32.4M 0 0 2860k 0 0:00:19 0:00:11 0:00:08 3350k 61 54.0M 61 33.1M 0 0 1977k 0 0:00:27 0:00:17 0:00:10 1462k 69 54.0M 69 37.3M 0 0 2174k 0 0:00:25 0:00:17 0:00:08 1621k 75 54.0M 75 40.6M 0 0 2230k 0 0:00:24 0:00:18 0:00:06 1614k 78 54.0M 78 42.4M 0 0 2211k 0 0:00:25 0:00:19 0:00:06 1473k 82 54.0M 82 44.4M 0 0 2198k 0 0:00:25 0:00:20 0:00:05 1353k 85 54.0M 85 46.2M 0 0 2192k 0 0:00:25 0:00:21 0:00:04 3018k 88 54.0M 88 48.0M 0 0 2171k 0 0:00:25 0:00:22 0:00:03 2164k 91 54.0M 91 49.6M 0 0 2153k 0 0:00:25 0:00:23 0:00:02 1862k 95 54.0M 95 51.4M 0 0 2139k 0 0:00:25 0:00:24 0:00:01 1855k 96 54.0M 96 52.2M 0 0 2082k 0 0:00:26 0:00:25 0:00:01 1602k 100 54.0M 100 54.0M 0 0 2085k 0 0:00:26 0:00:26 --:--:-- 1616k *** Updating firmware *** Updating kernel modules *** depmod 4.9.41+ *** depmod 4.9.41-v7+ *** Updating VideoCore libraries *** Using HardFP libraries *** Updating SDK *** Running ldconfig *** Storing current firmware revision *** Deleting downloaded files *** Syncing changes to disk *** If no errors appeared, your firmware was successfully updated to b9becbbf3f48e39f719ca6785d23c53ee0cdbe49 *** A reboot is needed to activate the new firmware Finished - Reboot needed! Click here to Reboot Now Custom parameter Kernel removed UPDATE ENDED - CHECK ABOVE LOG FOR ERRORS– The Kernel should now be Kernel 4.9.41 (you can check in Settings/Reboot in the Debug Info)
Yes, was
Linux max2play2 4.9.40-v7+ #1022 SMP Sun Jul 30 11:16:10 BST 2017 armv7l GNU/Linuxnow have
Linux max2play2 4.9.41-v7+ #1023 SMP Tue Aug 8 16:00:15 BST 2017 armv7l GNU/Linux– The beta updated Allo Plugin menu now has a „Master“ element to adjust the volume
Confirmed, looks ok .– If you want to connect it to Squeezelite, you have to replace the -V Digital with -V Master in the commando line options of Squeezelite
Done.
Am now using this for squeeze lite
-C 10 -o hw:CARD=PianoDACPlus -V Master -a 80:4:: -R -u vLE:::28 -r 176400,192000 -D 80 -f /var/log/squeezeboxserver/squeezelite.log -d all=debugAnd this for shairport
-t hardware -m hw:CARD=PianoDACPlus -c Masteralsamixer now shows the master
┌──────────────────────────────── AlsaMixer v1.0.28 ────────────────────────────────┐ │ Card: PianoDACPlus F1: Help │ │ Chip: F2: System information │ │ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │ │ Item: Master [dB gain: -17.00, -17.00] Esc: Exit │ │ │ │ │ │ ┌──┐ ┌──┐ ┌──┐ │ │ │ │ │▒▒│ │ │ │ │ │ │ │▒▒│ │ │ │ │ │ │ │▒▒│ │ │ │ │ │ │ │▒▒│ │ │ → │ │ │ │▒▒│ │ │ → │ │ │ │▒▒│ │ │ → │ │ │ │▒▒│ │ │ → │ │▒▒│ │▒▒│ │ │ → │ │▒▒│ │▒▒│ │ │ → │ │▒▒│ │▒▒│ │ │ → │ │▒▒│ │▒▒│ │ │ → │ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │ │ │ │ ├──┤ Low late └──┘ └──┘ ┌──┐ ┌──┐ 21ms 21ms 1s │ │ │OO│ │OO│ │OO│ │ │ └──┘ └──┘ └──┘ │ │ 52<>52 100<>100 0<>0 │ │< Master >DSP Prog Analogue Analogue Auto Mut Auto Mut Auto Mut Auto Mut Clock Mi │ │ │ │ │ └───────────────────────────────────────────────────────────────────────────────────┘and …
┌──────────────────────────────── AlsaMixer v1.0.28 ────────────────────────────────┐ │ Card: PianoDACPlus F1: Help │ │ Chip: F2: System information │ │ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │ │ Item: Volume Ramp Down Emergency Rate [1 sample/update] Esc: Exit │ │ │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ← │ │ │ │ │ │ │ │ │ │ → ← │ │ │ │ │ │ │ │ │ │ → ← │ │ │ │ │ │ │ │ │ │ → ← │ │ │ │ │ │ │ │ │ │ → ← │▒▒│ │ │ │ │ │ │ │▒▒│ → ← │▒▒│ │ │ │ │ │ │ │▒▒│ → ← │▒▒│ │ │ │ │ │ │ │▒▒│ → ← │▒▒│ │ │ │ │ │ │ │▒▒│ → │ │▒▒│ │ │ │ │ │ │ │▒▒│ │ │ │▒▒│ │ │ │ │ │ │ │▒▒│ │ │ │▒▒│ │ │ │ │ │ │ │▒▒│ │ │ ├──┤ Dual-Mon 90 └──┘ └──┘ └──┘ ├──┤ None 1 sample │ │ │OM│ │MO│ │ │ └──┘ └──┘ │ │ 52 0 0 0 52<>52 │ │ Digital Dual Mod Lowpass Max Over Max Over Max Over Subwoofe Subwoofe<Volume R> │ │ │ │ │ └───────────────────────────────────────────────────────────────────────────────────┘And all tests OK…
So thank you so much … and just a FYI Dual Mono is great …. so just a quick thankyou too to the folks at Allo, am getting lots of enjoyment.
16. Januar 2017 at 21:43 #25990Looks like Clive has already done a patch for this too, https://patchwork.kernel.org/patch/9186213/
Do you see any issues if I compile this up and give it a go?
-
