calimero

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • 17. September 2015 at 15:00 #15725

    Oups change in my last post ‚And it works with squeezelite with any problem‘ by ‚And it works with picoreplayre with any problem‘.

    To be complete on this subject the ‚Bus 001 Device 005: ID 074d:a504 Micronas GmbH‘ is my soundscience sqb.
    But nothing on squeezelite ???

    here is the result of ‚lsusb -v ‚:

    Bus 001 Device 005: ID 074d:a504 Micronas GmbH
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x074d Micronas GmbH
    idProduct 0xa504
    bcdDevice 3.01
    iManufacturer 1 SoundScience-TRLQ
    iProduct 2 QSB
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 187
    bNumInterfaces 3
    bConfigurationValue 1
    iConfiguration 3 G10 svn:4538
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 500mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0

    • This reply was modified 8 years, 7 months ago by calimero.
    17. September 2015 at 9:54 #15719

    Hi,
    I try this but no effect.
    Here is the list usb of my rpi :

    root@max2play:~# lsusb
    Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
    Bus 001 Device 005: ID 074d:a504 Micronas GmbH
    Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
    root@max2play:~# /opt/squeezelite/squeezelite -l
    Output devices:
    null – Discard all samples (playback) or generate zero samples (capture)
    plugequal – Equalizer for plughw:0,0
    default:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device
    sysdefault:CARD=ALSA – bcm2835 ALSA, bcm2835 ALSA – Default Audio Device

    There is No QSB card ???
    Nb : I plug the qsb before boot my rpi. And it works with squeezelite with any problem (but all of my rpi are in max2play and i want the airplay)

    • This reply was modified 8 years, 7 months ago by calimero.
Viewing 2 posts - 1 through 2 (of 2 total)