Subwoofer Signal on IQAudIO DigiAMP+ ??

Max2Play Home 2016 (en) Forums General Questions on Hardware and Max2Play Versions Subwoofer Signal on IQAudIO DigiAMP+ ??

This topic contains 1 reply, has 2 voices, and was last updated by  Heiner Moderator 11 months, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • 17. November 2019 at 12:33 #47545

    hey there guys…
    Is there any way, to get on the IQAudIO DigiAMP+ on a signal to send it to an active subwoofer ? I mean, anywhere on that PCB must be an audio signal, that will be amplified on that PCB/Amp. I would like to use an active sub on one of my setups.

    For sure, I could use my oscilloscope and search for that signal and I guess, I would find it. But what, if this signal can not be used due to wrong impedances or something else ?

    It would be nice to solder an additional output to that PCB to use an active subwoofer…

    Or is there another way, to get that signal ?

    thanks for your help !

    20. November 2019 at 16:19 #47575

    Hi martin-s,

    There is indeed one way, the 2.1 Piano DAC by Allo. It offers up two individual RCA outputs for stereo AND subwoofer.

    Here’s our bundle for the device
    And the device itself

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here