SMB vs. sFTP vs. FTP throughput

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI SMB vs. sFTP vs. FTP throughput

Tagged: 

This topic contains 2 replies, has 2 voices, and was last updated by  MarioM Moderator 7 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • 27. Januar 2021 at 16:36 #50668

    Hi,

    uploading media to max2play on a Raspberry PI3 can be a pain. SMB isn’t performing well and sFTP is even worse from a throughput point of view – I’d say. But how about plain ftp? (within my isolated LAN, security is no issue)
    The reason I’m asking is the tremendous difference in throughput when looking at my FritzBox 7590 router. FTP provides more than 2X advantage and I’m wondering if this would be similar for max2play on a Raspberry PI3. Has anyone tested yet and can comment?

    Thanks,
    Toby

    29. Januar 2021 at 19:12 #50690

    Well, I finally found the time to instal and configure vsftpd on my PI3. And the outcome is quite the opposite compare to FritzOS.
    ftp transfer is way slower compared to SMB. Here’s the ranking.
    1) SMB (3.5MB/s)
    2) scp (2 … 2.5 MB/s)
    3/4) ftp and sftp (1 … 1.5MB/s)

    Maybe this data is of use for others.
    Cheers!

    2. Februar 2021 at 18:03 #50715

    Hi streumix,

    Thank you for your report!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here