Slimserver very slow startup CPU at 100% for minutes

Max2Play Home 2016 (en) Forums Max2Play as Squeezebox (Player / Server) Slimserver very slow startup CPU at 100% for minutes

This topic contains 1 reply, has 2 voices, and was last updated by  MarioM Moderator 3 weeks, 5 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • 27. Oktober 2020 at 16:45 #49932

    Hi,
    I’m using max2play on a RPi3.
    It Is very good except that in some situations the Logitech media server becomes unresponsive. The only way Is to restart the server or the RPi, but the startup of the server takes ages with the cpu At 100% for minutes.
    What can be the case? The logs look clean to me (can send of needed).

    Thanks!

    28. Oktober 2020 at 13:34 #49949

    Hi gianpaoloracca,

    Which Max2Play version do you use? Have you installed our stretch image or buster image? You can find this info in the Debug Info at the bottom of the Settings/Reboot page. This is definitely not normal behavior. The CPU utilization should hardly reach the 100% mark. I would recommend you to burn a fresh image to the SD card and reinstall the Squeezebox Server.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here