SD Card Protection Problems

Max2Play Home 2016 (en) Forums Max2Play Add-ons SD Card Protection Problems

This topic contains 2 replies, has 2 voices, and was last updated by  Heiner Moderator 2 weeks, 3 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • 1. July 2017 at 23:25 #29773

    I’m running an RPI-2, HifiBerry DAC+, and RPI 7-inch touchscreen.

    Everything works fine until I install/set the SD Card Protection to Read-Only. After a reboot, the touch screen ignores touches and the hifiberry no longer plays. On occasion, the 7-in display will get random lines and colors in it. About 1 in every 4 reboots will be successful.

    Just wondering if there are any compatibility issues with the SD Protection add-on and my hardware listed above. I don’t believe this is a power supply issue as I’m running a 5.1V @5A supply fed by soldered #18 gauge wire directly to the board(s).

    1. July 2017 at 23:32 #29774

    Well, I spoke too soon. This just happened with the SD protection uninstalled.

    5. July 2017 at 14:44 #29822

    Hi joe,

    Sorry about the inconvenience. Please try burning a fresh image and let us know what your steps are in setting it up if it fails again.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here