RPI4+touchscreen Openhab control panel

[Tiender premium]

Tiender premium

13. Juni 2020 at 9:27 #49003

Hi,

I’ve got a RPI4 with a ELO 1010L touchscreen which is working perfectly as a squeezebox client for my openhab system.

Now i want to use this setup as a control panel for Openhab. In several rooms there wil be this setup.

The openhab server is running at a 19″ server PC.
How do i setup the RPI4 to go to the web interface? Normally i’ll use a web-browser and go to 192.168.100.10:8080 but now i cant figure out how i need to do this on de M2P RPI.

• This topic was modified 3 years, 10 months ago by Tiender.

[Tiender premium]

Tiender premium

13. Juni 2020 at 12:31 #49005

Tried to install Iceweasel because i didn’t find it pre-installed.
Got this after the installation:

Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Get:3 http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease [15.5 kB]
Ign:4 https://dl.bintray.com/openhab/apt-repo2 stable InRelease
Get:5 https://dl.bintray.com/openhab/apt-repo2 stable Release [6,051 B]
Err:3 http://ppa.launchpad.net/webupd8team/java/ubuntu trusty InRelease
The following signatures couldn’t be verified because the public key is not available: NO_PUBKEY C2518248EEA14886
Reading package lists…

Browser installed.

But i still can’t find it on the Rpi. Also after a reboot.

#### FILESYSTEM ####
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 14415664 2567332 11231956 19% /
devtmpfs 834528 0 834528 0% /dev
tmpfs 966624 0 966624 0% /dev/shm
tmpfs 966624 11876 954748 2% /run
tmpfs 5120 4 5116 1% /run/lock
tmpfs 966624 0 966624 0% /sys/fs/cgroup
/dev/mmcblk0p1 258096 39985 218111 16% /boot
tmpfs 193324 8 193316 1% /run/user/1000

#### LOAD AVERAGE ####
0.15 0.18 0.10 1/224 2785

#### KERNEL ####
Linux M2PBadkamer 4.19.50-v7l+ #895 SMP Thu Jun 20 16:03:42 BST 2019 armv7l GNU/Linux

#### LINUX-VERSION ####
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 10 (buster)
Release: 10
Codename: buster

[MarioM Moderator]

MarioM Moderator

16. Juni 2020 at 14:08 #49025

Hi Tiender,

It could be that there are problems with the Iceweasel installation with the Pi 4. We’ll test that. Apart from that you could try installing a different browser on the Pi. Then the web access of the Openhab interface should work as usual.

[MarioM Moderator]

MarioM Moderator

17. Juni 2020 at 14:10 #49044

It looks like Iceweasel is no longer actively supported. We are taking care to offer a browser preinstalled again soon. Until then you could use something like Firefox ESR for your application.