RasPi Hifiberry 7'' Display Project – GPIO-Pin Question

Max2Play > Topics > RasPi Hifiberry 7'' Display Project – GPIO-Pin Question

This topic has 1 reply, 2 voices, and was last updated 10 years, 11 months ago by Heiner <i>premium</i>.

Viewing 2 posts - 1 through 2 (of 2 total)

Back to forum

Posted in: Max2Play as Squeezebox (Player / Server)
fblu <i>premium</i>

25. November 2015 at 14:35 #17018

Hi, I followed your tutorial (http://www.instructables.com/id/High-End-Sound-with-7-Inch-Touchscreen-Control-Bas/?ALLSTEPS) and almost completed my setup. At first I connected Pin 1 and 3 (Nr. 2 and Nr. 6 of the Raspberry) of the additional Pin-Connector Line, because I thought, 1 is for 5V and 3 for Ground. Then I realized, that you took the 4th (Nr. 8 on Raspberry) PIN which is a GPIO PIN in the raspberry layout?
I hope I didn’t destroy anything by connecting to pin 3?
Before I connect it to power I wanted to be sure that pin 4 is really the one, can you give me some advice?

Thank you very much for your help so far with this project!

Heiner <i>premium</i>

25. November 2015 at 16:24 #17019

Hi fblu,
As in the comments on Instructables.com, here a photo so you make sure you have the correct pins:

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.