- This topic has 2 replies, 3 voices, and was last updated 4 years, 7 months ago by
.
-
Edit: Hat sich erledigt, nach einem dritten Installationsversuch hat es dann plötzlich geklappt…?!
###########
Hallo zusammen,
ich habe Probleme beim Installieren der Raspberry Pi Camera (Rev. 1.3) auf meinem Raspberry Pi 1 Model B.
Am Ende heißt es zwar, die Installation sei erfolgreich verlaufen, doch starten lässt sich die Kamera nicht. Während der Installation gibt es mehrer Fehlermeldungen, die folgenden Zeilen habe ich nach Abschluss des Installationsprozesses kopiert:The following NEW packages will be installed:
gpac-modules-base liba52-0.7.4 libfreenect0.2 libgpac3
0 upgraded, 4 newly installed, 0 to remove and 14 not upgraded.
Need to get 1,464 kB of archives.
After this operation, 4,353 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
libfreenect0.2 libgpac3 liba52-0.7.4 gpac-modules-base
E: There are problems and -y was used without –force-yes
cp: cannot stat ‘www/*’: No such file or directory
chmod: cannot access ‘/var/www/rpicam/raspizip.sh’: No such file or directory
cp: cannot stat ‘etc/apache2/conf.d/other-vhosts-access-log’: No such file or directory
chmod: cannot access ‘/etc/apache2/conf.d/other-vhosts-access-log’: No such file or directory
cp: cannot stat ‘etc/sudoers.d/RPI_Cam_Web_Interface’: No such file or directory
chmod: cannot access ‘/etc/sudoers.d/RPI_Cam_Web_Interface’: No such file or directory
cp: cannot stat ‘bin/raspimjpeg’: No such file or directory
chmod: cannot access ‘/opt/vc/bin/raspimjpeg’: No such file or directory
/var/www/max2play/application/plugins/rpicam/controller/../scripts/install-rpi-cam.sh: line 101: etc/raspimjpeg/raspimjpeg: No such file or directory
/var/www/max2play/application/plugins/rpicam/controller/../scripts/install-rpi-cam.sh: line 103: [: ==: unary operator expected
cp: cannot stat ‘etc/raspimjpeg/raspimjpeg’: No such file or directory
Motion Detection set to internal camera
sed: can’t read /etc/raspimjpeg: No such file or directory
chmod: cannot access ‘/etc/raspimjpeg’: No such file or directory
/var/www/max2play/application/plugins/rpicam/controller/../scripts/install-rpi-cam.sh: line 121: etc/motion/motion.conf: No such file or directory
sed: can’t read etc/motion/motion.conf: No such file or directory
cp: cannot stat ‘etc/motion/motion.conf’: No such file or directory
chown: invalid user: ‘motion:www-data’
chmod: cannot access ‘/etc/motion/motion.conf’: No such file or directory
Reloading apache2 configuration (via systemctl): apache2.serviceWarning: Unit file of apache2.service changed on disk, ’systemctl daemon-reload‘ recommended.
.
finished Please Click here to Reboot Now!Installation erfolgreich
Was kann ich machen, um die Kamera erfolgreich zu installieren? Ich habe mir die M2P-Linzens gestern extra gekauft, um damit die Kamera komfortabel als Überwachungskamera nutzen zu können.
Ich habe genau das selbe Problem mit den selben Fehlern während der Installation. Kann mir jemand weiter helfen? Ich hab jetzt schon zigmal alles de- und neuinstalliert – ohne Erfolg. :-/
Edit: Ich habe übrigens einen Raspberry PI 3 und M2P in der Version 2.50 installiert.
You must be logged in to reply to this topic.