Problem with ethernet

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI Problem with ethernet

This topic contains 3 replies, has 2 voices, and was last updated by  Heiner Moderator 4 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • 8. October 2017 at 18:23 #31787

    My max2play on a HifiBerry amp+/RPi doesn’t work any more. When I power on the unit, I see the red LED on the RPi come on and the green LED flicker (SD card activity); but the LEDs around the ethernet port stay off. I have tried with two different RPis and with2 different ethernet cables, but the problem stays the same. Does anybody have any idea about what could be wrong and how to fix it? Thanks!

    • This topic was modified 6 months, 2 weeks ago by  sdspieg.
    9. October 2017 at 11:10 #31793

    Hi sdspieg,

    Have you tried establishing a connection via WiFi (WPS, Access Point Autostart Mode) to rule out the ethernet port as a source of error?

    2. December 2017 at 16:48 #32756

    I had almost given up on max2play because of this problem. But so today I tried burning a new version of max2play – only to find out that there was something wrong with my micro-sd card. I got a new one, installed max2play and bingo! – everything is working beautifully again (including the ethernet connection). I just figured I’d report back just in case anybody else runs into the same problem.

    • This reply was modified 4 months, 2 weeks ago by  sdspieg.
    4. December 2017 at 17:54 #32774

    Hi sdspieg,

    Thank you so much for the follow-up! Glad that you got it working 🙂

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Register here