PiFi Digi+ V1.0 HAT

Max2Play Home Forums Max2Play on Raspberry PI PiFi Digi+ V1.0 HAT

Viewing 3 posts - 1 through 3 (of 3 total)
  • 27. Mai 2018 at 14:35 #35903


    New user of Max2play and indeed very happy. Using Pi 3B + with 7″ touch display and outputting audio via HDMI to my Onkyo AVR.
    Have ordered the above card as it will be easier to use Spdif cable than HDMI one.
    Which card option should I use in set up menu?
    Is there any way to utilise inbuilt IR sensor with some IR remote control so I can use it in the same way as my Squezeebox Touch?

    This is the card: https://www.digitec.ch/de/s1/product/oem-pifi-digi-v10-elektronikmodul-5999150

    28. Mai 2018 at 14:07 #35917

    Hi kiza,

    We are not familiar with the PIFI Digi, but it probably also uses the HiFiBerry Digi driver as the PIFI cards are usually Chinese approximations of HiFiBerry cards.

    For IR you can try using our selection in the Raspberry Settings for IR GPIO pins.

    28. Mai 2018 at 22:35 #35938

    Thanks Hainer. Should have it with me shortly and will follow your instructions.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here