Jivelite and 7" RPi screen

Max2Play Home 2016 (en) Forums Max2Play Add-ons Jivelite and 7" RPi screen

This topic contains 2 replies, has 2 voices, and was last updated by  MungoBBQ premium 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • 26. July 2016 at 17:10 #21870

    Hello, I’ve got problems with the Joggler skin for Jivelite – I’ve run the patcher in M2P, but the skin is still slightly too large for my display (RPi 7″ touch). Am I missing something? I can’t see the bottom and the right of the screen.

    27. July 2016 at 15:13 #21895

    The image for 7″ touchdisplay does not require a patch. In the other images, the 7″ RPi Touchdisplay should be a selection for installation. The patch you are probably referring to is for another 7″ touchscreen with a different resolution (See Changelog v2.34). Please try burning a fresh 7″ Touchdisplay image and not installing the patch, the screen should automatically boot Jivelite in the correct Joggler Skin from the first start.

    27. July 2016 at 17:39 #21913

    Don’t know why I never tried that, but it works after a re-install of Jivelite. ­čÖé

    Thank you!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here