Max2Play Home › Forums › Max2Play on Raspberry PI › [SOLVED] how to play a 96kbps audio stream with hifiberry amp?
- This topic has 5 replies, 3 voices, and was last updated 6 years, 8 months ago by
Staudie premium.
-
Posted in: Max2Play on Raspberry PI
-
31. Dezember 2016 at 20:00 #25341
Hi,
i have several pi’s with amps or usbsoundcards around the house in my multiroom audiosystem.
but is i want to play a 96kbps audiostream like this one
http://opml.radiotime.com/Tune.ashx?id=s2398&formats=aac,ogg,mp3,wmpro,wma,wmvoice&partnerId=16&serial=532b264a5668680d307f52a9e9844055
i only get a sisseling sound from the pi’s with a hifiberry amp , on al the other pi’s with usb soundcards i have no problem.
i am running the latest updated 2.39 version of m2play.
anny sugestions?5. Januar 2017 at 17:51 #25574Hi kris,
What player do you use and what power supply for the amp+?5. Januar 2017 at 19:31 #25579Hi,
squeezelite , soundcard :default-snd_rpi_hifiberry_amp , powersupply 15V/4A
i have no clue why because the radio station is now available at 128kbps and all works well .
only 96kbps dous not play.11. Januar 2017 at 15:28 #25771Hi kris,
You might want to try adding a hardware volume control parameter for your Amp: https://www.max2play.com/en/wiki/optimizing-squeezelites-volume-control/
You can also try selecting the sysdefault instead of the default selection as your sound card driver.12. Januar 2017 at 16:38 #25819I had this same problem…. there is a switch to change the decoding. Let me see if I can find it.
12. Januar 2017 at 16:51 #25821Under the „Audio Player“ tab look for Squeezebox „Edit Advanced Options“. Add -u X „command line options“
-u|-R [params]
Enable upsampling of played audio. The argument is optional; see
RESAMPLING (below) for more information. The options -u and -R
are synonymous.X resamples to the maximum sample rate for the output device
(„asynchronous“ resampling). -
You must be logged in to reply to this topic.