how to install max2play on raspberry pi 2

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI how to install max2play on raspberry pi 2

This topic contains 1 reply, has 2 voices, and was last updated by  Heiner premium 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • 9. February 2016 at 11:32 #18415

    greetings folks i just wanted to ask for help on where i could find a tutorial on how to install max2play on the raspberry pi 2

    i downloaded the image and installed it to my sdcard , but when i boot up the pi 2 i am stuck on loading screen

    it asked me to log in username then password , i managed to find them i used pi as username then used raspberry as password

    then after that i only see

    [email protected] s on the screen

    what do i do next ? how can i boot up properly

    did i do something wrong ?

    10. February 2016 at 14:30 #18447

    Hi oenone,
    You should reach the webinterface of Max2Play by typing “http://max2play/” in one of your home network’s devices’ browser. You can also check your router’s interface to see if it gave Max2Play an IP, you can then use this IP to access the web interface as well. Max2Play is a headless image, the direct connection of a screen is only necessary for outputs of Jivelite or Kodi. The control happens all through the web interface, no console commands necessary. For more info, take a look at our introduction video (https://www.youtube.com/watch?v=pZB4aSiW4c0) and our other videos.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here