forbidden access to max2play on Rpi

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI forbidden access to max2play on Rpi

This topic contains 2 replies, has 2 voices, and was last updated by  Heiner Moderator 1 week, 1 day ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • 11. September 2018 at 19:01 #37806

    I have 3 Raspberry Pi’s running Max2Play.

    all on the same wired network
    all 3 are doing what they’re supposed to do (controlled via LMS)

    there was an update announced today for Max2Play, so I went about my usual task of
    updating. first two went okay, but when I get to the 3rd one, I get the following message:

    Forbidden
    You don’t have permission to access / on this server.
    Apache/2.4.10 (Raspbian) Server at 192.168.0.43 Port 80

    I haven’t done anything specific to this unit, other than update Max2Play the last few times there was an update.
    other than that, it’s been working just fine.

    When I try and ssh into this particular one, I’m met with

    [email protected]:~$ ssh [email protected]
    Connection reset by 192.168.0.43 port 22

    11. September 2018 at 20:09 #37807

    update:

    rebooted the Rpi. would ping but now not play anything via LMS nor allow web or ssh connection.
    rebooted again and there was only a ping response. the device wasn’t showing up in LMS.

    I have had a similar problem in the early days of using a Rpi with squeezebox (pre Max2Play days)
    and it ended up being a memory card problem. So that is what I will try this time.

    12. September 2018 at 9:21 #37811

    Hi radiomog,

    Thanks for the quick update.

    Please do let us know if the memory card was at fault if you find out.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here