Error in start_accesspoint_onboot.sh during boot

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI Error in start_accesspoint_onboot.sh during boot

This topic contains 3 replies, has 2 voices, and was last updated by  MarioM Moderator 3 months, 4 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • 7. April 2021 at 13:02 #51092

    Hi,

    I’m running latest 2.53 on PI 3B and boot log contains this message:

    [ 16.025737] rc.local[712]: /var/www/max2play/application/plugins/accesspoint/scripts/start_accesspoint_onboot.sh: Zeile 7: [: : Ganzzahliger Ausdruck erwartet.

    Any action required?

    Toby

    7. April 2021 at 16:58 #51096

    Hi Toby,

    I’ll take a look at this and get back to you as soon as possible. It looks like something is wrong in /etc/rc.local. The access point plugin will probably not start at this point if it is activated.

    7. April 2021 at 17:05 #51098

    OK – thanks.
    But since I do not experience missing functionality, I’m assuming it’s about the acceess point mode of the WiFi for initial configuration, right?

    7. April 2021 at 17:17 #51100

    You are right, my bad. It has nothing to do with the plugin. But there seems to be an error in the file. I will check this as soon as possible. In any case, thanks for the hint!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Register here