Di I need to update after buying a Bundle with Image?

Max2Play Home 2016 (en) Forums SD-Card Imaging and getting started Di I need to update after buying a Bundle with Image?

This topic contains 1 reply, has 2 voices, and was last updated by  Heiner Moderator 1 month, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • 6. September 2017 at 19:55 #31155

    I bought the HiFiBerry Digi+ Bundle incl. the Max2Play pre-configured image on a 16GB SD and an three months test licence.
    I managed to access the Pi through both LAN and WLAN. So far so good.

    But when I try to expand the data system or Update Max2Play (as mentioned on the included leaflet, wich I found in the box) I get the following warning on the UI: “Device is started in Automatic Accesspoint Mode. For security, only WiFi configuration is possible to connect Max2Play to your local network.”

    Does that mean I dont need to expand data system nor do any update?

    7. September 2017 at 9:26 #31159

    Hi Iwan,

    You can disable the access point by removing the tick from the WiFi/LAN menu on that feature. It’s just a security precaution.

    Bundle images come preconfigured and with an already expanded filesystem. We do recommend updating your system as those include bug fixes and other improvements, but they are not absolutely necessary.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here