DAC USB Audiophonics and delay before playing

Max2Play Home 2016 (en) Forums Max2Play as Squeezebox (Player / Server) DAC USB Audiophonics and delay before playing

This topic contains 2 replies, has 2 voices, and was last updated by  Heiner Moderator 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • 19. March 2018 at 11:55 #34517

    Hi everyone,

    I just bought 2 USB DAC audiophonics (U-Sabre LTE USB SA9027 / ES9023) and i have some delay when i try to play some local music or from spotty.

    Detail:
    Player : USB DAC on Raspberry pi 3.
    Server : LMS 7.9.1 on synology NAS
    built-in player is disabled.
    Sysdefault or hw driver have the same effect.

    When a music start or start again on LMS, i have to wait 10s to 20s before the music really playing.
    With a basic USB soundcard (6€ on Amazon) it’s works perfectly.

    Someone would have some advices to fix this problem?

    Thanks

    21. March 2018 at 14:49 #34605

    I found the problem but i don’t know how to fix it.

    When i use one RPI with multisqueeze the Audiophonics USB DAC works well without delay.
    When i plug a second raspberry with multisqueeze and others DAC (other brand, cheap dac for computer) I have a delay.

    I don’t understand why another raspberry on the network cause this delay.

    If i use only cheap DAC on the two RPI i don’t have delay.

    So i send the Audiophonics USB back.

    23. March 2018 at 11:12 #34694

    Hi remyb,

    You can still make sure that no other USB periphery is connected and that max USB current is active in the Raspberry Settings.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Register here