Change Samba share Access user

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI Change Samba share Access user

This topic contains 4 replies, has 2 voices, and was last updated by  Heiner Moderator 2 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • 6. September 2018 at 15:00 #37701

    How can I change the Samba share access username from „root“ to „pi“?
    I have mounted the share on another raspberry pi and cannot write to the share unless I preprend „sudo“ in front on the command.
    I need to be able to set up user „pi“ to have write access to the share as well.

    7. September 2018 at 16:35 #37721

    Hi bvaughan,

    You should be able to set a custom user for your share in our webinterface in the field: User for Samba-Access:

    7. September 2018 at 16:35 #37722

    Hi bvaughan,

    You should be able to set a custom user for your share in our webinterface in the field: User for Samba-Access:

    8. September 2018 at 17:56 #37726

    The element is marked as readonly on the page and cannot be edited.

    <td>User for Samba-Access:</td>
    <td><input type=“text“ readonly=““ name=“sambauser“ value=“root“></td>

    10. September 2018 at 11:47 #37737

    Hi bvaughan,

    If you set the Creation Mode „777“ you should get both write and read access on both sides, regardless of the login.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

Register here