Cannot access pi via ssh after wifi parameter error

Max2Play Home 2016 (en) Forums Max2Play on Raspberry PI Cannot access pi via ssh after wifi parameter error

This topic contains 1 reply, has 2 voices, and was last updated by  MarioM Moderator 5 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • 6. April 2020 at 22:12 #48414

    After specifying a wrong wifi password in the Max2Play web interface, I cannot access the pi via ssh when connecting directly to the router via cable. I am using a fixed ip address. The address appears on the network as active in the ip scanner program, but cannot be accessed. Is there any solution short of creating a new image?

    7. April 2020 at 15:24 #48416

    Hi ehrnfldm,

    You can download a fresh image from our download page and burn it to the SD card. If you then restart the Pi, you can set up Max2Play from scratch.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Register here