Max2Play Home › Forums › Max2Play on Raspberry PI › Install on a 2TB SSD? › Reply To: Install on a 2TB SSD?
Burn the m2p_buster_rpi-v253.img.zip with Raspberry Pi Imager.
Says 93% used:
/dev/root 3.1G 2.7G 217M 93% /
fdisk -l /dev/sda shows this:
Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: 2115
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0634f60c
Device Boot Start End Sectors Size Id Type
/dev/sda1 8192 532480 524289 256M c W95 FAT32 (LBA)
/dev/sda2 540672 7000000 6459329 3.1G 83 Linux
Went to resize it right in max2play but it says this:
Resize Filesystem: sda2
No Resize possible – no valid partition found to expand. Contact Max2Play-Support to add support for further file-systems.
Make sure to disconnect all USB-drives and Memory-Cards and do a reboot before expanding the filesystem!
Any other way to get this to use all the 2TB space?